whooshing sound from under the dash when I press on the brakes

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Ontheboulder

Full Access Member
Joined
Feb 27, 2022
Posts
310
Reaction score
366
Location
colville,wa
First Name
greg
Truck Year
1987
Truck Model
gmc sierra classic v2500
Engine Size
350
I am getting a whooshing sound from under the dash when I step on the brakes, it goes away after i pump the peddle a few times. Any ideas?? 1987 GMC V2500.All the brakes are new with zero miles on them,new calipers and rear wheel cylinders as well as new master cylinder!
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,702
Reaction score
3,767
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
There should be a foam filter in the vacuum booster around the brake pedal rod where it mates to the firewall. I think you should be able to see it with a flashlight from under the dash. If it’s missing that can happen. The one in my factory booster looked like rotten seat cushion foam which crumbled and disintegrated when I removed it.

Did you replace the booster? I’ve read a bunch of customer reviews on refurbished boosters missing the plastic boot that seals to the firewall. I could see them forgetting that part too.
 

Ontheboulder

Full Access Member
Joined
Feb 27, 2022
Posts
310
Reaction score
366
Location
colville,wa
First Name
greg
Truck Year
1987
Truck Model
gmc sierra classic v2500
Engine Size
350
There should be a foam filter in the vacuum booster around the brake pedal rod where it mates to the firewall. I think you should be able to see it with a flashlight from under the dash. If it’s missing that can happen. The one in my factory booster looked like rotten seat cushion foam which crumbled and disintegrated when I removed it.

Did you replace the booster? I’ve read a bunch of customer reviews on refurbished boosters missing the plastic boot that seals to the firewall. I could see them forgetting that part too.
thanks! the booster is original I think! why would the noise go away after a few pumps on the pedal ??
 

Radiohead

That guy on the Columbia
Joined
Mar 17, 2022
Posts
2,486
Reaction score
8,112
Location
Low Earth Orbit where it's safer
First Name
Eric
Truck Year
MCMLXXIX
Truck Model
C-20 Silverado Camper Special
Engine Size
454 crazy cubes, or 7.4 luscious litres
The seal gets exercised and starts to work?
 

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,917
Reaction score
4,116
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
Another possibility is there is a valve under the dash near the brake pedal if you have cruise control. This hose hose hooks up to the cruise control pod (between the TBI and power brake booster here) and runs through the firewall to the cruise cut off switch.

You must be registered for see images attach
 

Ontheboulder

Full Access Member
Joined
Feb 27, 2022
Posts
310
Reaction score
366
Location
colville,wa
First Name
greg
Truck Year
1987
Truck Model
gmc sierra classic v2500
Engine Size
350
Another possibility is there is a valve under the dash near the brake pedal if you have cruise control. This hose hose hooks up to the cruise control pod (between the TBI and power brake booster here) and runs through the firewall to the cruise cut off switch.

You must be registered for see images attach
Thanks!! I bet that is it, cause I was knee deep under the dash last year,never noticed anything
 

Ontheboulder

Full Access Member
Joined
Feb 27, 2022
Posts
310
Reaction score
366
Location
colville,wa
First Name
greg
Truck Year
1987
Truck Model
gmc sierra classic v2500
Engine Size
350
Thanks!! I bet that is it, cause I was knee deep under the dash last year,never noticed anything
Thanks for the picture, mine has 2 vac lines 1 big and 1 small which goes to the vac ball and the big one goes inside the cab. My cruise is disconnected so no worries on it working but just want the brakes to be good.I did hit the brake pedal hard a few times thinking of the proportioning valve,now the pedal seems much firmer and no more whooshing noise.
 

Forum statistics

Threads
44,173
Posts
950,829
Members
36,287
Latest member
goodwrenchca
Top