Which shocks do I need?

[D-Short]

Hello everybody, started the 4/6 drop today on the 84 C10
2" drop spindles with 2" lowering springs with flip kit in the rear.

Which shocks set-up do I need?

 

[GMFORLIFE]

https://aldanamerican.com/product/s...-c10-1975-front-single-adjustable-sku-100105/

 

[Brett77]

Measure distance to after lowered and get a good quality shock.

 

[D-Short]

Measure distance to after lowered and get a good quality shock.

I don’t understand, measure distance to what

 

[Brett77]

From shock mount to shock mount!

 

[WesN]

With spindles the shock height or length remains the same it is shorter springs that shorten the required shock length. I run 2” spindles and 2” Bell tech springs and after checking mount distance ended up using the stock shocks and it works fine. With a 3” spring you might need shorter shocks but “measure twice buy once”.

 

[GTP51]

Belltech Nitro Drop 2 The part numbers are 8511 and 8527 is what I used on mine, got them from Summit work fine

 

[Raider L]

Yeah man, Belltech is some good stuff. They've got every length, and excellent quality.
I put them right up there with QA1 stuff. I wish I could afford it, but there's plenty of good stuff out there.