What have you done to your square lately??

[82sbshortbed]

Wha

Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.

You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.

You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,

What about these?

You must be registered for see images attach

 

[pinballlarry1]

Saw those but really don't like that idea. Thanks for looking!

 

[Mr Clean]

Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.

You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.

You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,

What part of San Diego?

 

[Bextreme04]

Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.

You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.

You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,

Speedway an Amazon both sell them as well.
$1.99 each at speedway. https://www.speedwaymotors.com/Pico...fw5jqPCLa44LcLnMIHi2S4XJyEltIsiUaAkv2EALw_wcB
Not sure what they charge for shipping.

Amazon wants $7.55/ea, but free shipping if you are a prime member. https://www.amazon.com/dp/B00030CPSM/

 

[82sbshortbed]

Nice find!

 

[Truck82]

Started taking apart the dash a little and then looked on the underside...
Quick question; Y'all have a bunch of spaghetti hanging down under your dash too??

You must be registered for see images attach

I've got some work ahead of me... Lord, beer me strength.

I don’t even know where to start on mine. Any tips?

 

[Truck82]

Repop tail lights installed still need to get a reverse bulb, also used new stainless hardware

Looks great! I’ve got a brand new set of tail lights sitting in the box waiting to be installed. Maybe I’ll get on it this weekend

 

[77Dmax]

I have to dust the snow off, hitch it to the trailer and drag a couple Buicks home Monday..

 

[Truck82]

Finally got my exhaust finished. 24 inch dual glass packs with side exit before the rear wheels. I’m loving it!

 

[82sbshortbed]

That's exactly like my 82 is run.

You must be registered for see images attach

Probably could cut the pipe backsome. Also put a tip on it that rusted. Lol

 

[silverscottsk10]

Follow up to my recent post about the headlight on warning buzzer. If anyone has some of the factory wire connectors that plug in to the fuse panel, I would pay for one that fits LPS and IGN if you have some extras. I searched and they seem to be scarce. Pico wiring makes the black for BAT and clear for IGN, but cheapest is at summit racing for $4 each, plus shipping.

You must be registered for see images attach

Other than these, seems that original taps are commanding lots of dollars being "vintage". If some reasonably priced originals can't be had, then my push in blades will have to do.

You must be registered for see images attach

I sure miss the days at Pick-a-part and Pull Ur Own back in San Diego, nothing like that here in NW Montana,

I'm half tempted to buy a 3-d printer just to make stuff like this that's small and probably very simple to render and slice