What have you done to your square lately??

[Ajax19]

New switch assy from Tractor Supply got it running. (Most of that style are made by the same company, no matter what the packaging says. This one is "Porter Cable" for example.) Mega sent me a new switch and motor under warranty, so now I have spares, but the long term fix will be upgrading the switch entirely.

Hey.... at least it's still September but DANG is this taking longer than I thought. I WAS hoping to cut out of work early tomorrow and get color on the Burb, but it doesn't look like that's gonna happen. Got the new cowl hood fitted yesterday, and the wife stripped it this morning, so the epoxy is flashing off on it right now. The whole body, with the exception of the barn doors is blocked out/wet sanded and basically ready for paint.

You must be registered for see images attach

You must be registered for see images attach

Went to hang the "new" barn doors, since I got a different set due to ours having some bad cancer at the top and bottom. (dang that seal seems to be designed to trap dirt and moisture) Lets just say..... they're on there, but they don't quite fit. lol So here I am, about to search the forum for whatever lore there is to adjusting them. I'm dreading what I suspect, that I need to bend the hinges to get them to sit right.

You must be registered for see images attach

Other than that, and selling the 1st born to LMC (and probably another vendor or two) so I can source a bunch of parts I'll need to put it all back together nicely...... it's going GREAT. Wife wants to lose the silver stripe, so it's gonna be ALLLLL Red, or Victory Red rather. I wanted to do it in single stage, because keeping dust off a fresh clear coat is just NOT happening........ but finding a decent single stage locally is proving difficult. The local Wesco guys were pushing BC/CC and HARD. Told me single stage is "old technology, that nobody uses anymore". So that's something else I gotta figure out tomorrow.

I Had good results with Rust-Oleum $78 for gallon of red

 

[Grit dog]

I Had good results with Rust-Oleum $78 for gallon of red

The Wesco guys in Auburn are helpful and not pretentious.
Red is the most expensive color you can buy.
I’ll reserve comment about spending many hours and $ to get a vehicle ready to paint and then using cheap oil based paint. But it doesn’t make sense for about all the reasons one can think of.
@Girth i know you’re now on short clock weather wise, but reccomend Tamco and with their frequent sales, you could get one of a few different types of high quality 2k urethane red for around $300/gal. Probably be double much that for shop line PPG Omni at Wesco. Pre Covid, it was about $60 for a half pint of maroon metallic single stage Omni at Wesco.
Burb takes alot of paint though! Youd need 2 gallons at least of single stage and probably use every drop of it and be sweating it. Even more if it’s cheap paint. So the Wesco guys aren’t totally wrong from an economical standpoint. You could base coat it easily with a gallon of base and have enough leftover to fix every whiskey dent for the next 15 years. And clear coat is about half the price of red ss or base. It makes sense financially and durability wise to do base/clear.
That financial gap narrows with cheaper colors but the other advantages of 2 stage are still the same.
I’m assuming you just want a bright red or are you matching a factory color?
Another way to save a buck is get some cheaper urethane base or single stage preferably base and basically guide coat the vehicle first so your top coat base or single stage will cover quicker.
Just some thoughts, paint is expensive. Cheap paint is disappointing in the long run but there are ways to save a buck.
For example when I did the blue truck, I “accidentally” used the wrong color base coat on the first panels I “tested” on. Got the wrong shade but went ahead and base coated the the underside of the hood and inside of tailgate and some misc trim pieces. It was close and what I found is the right color covered MUCH quicker. Took one less coat. So when I did the inside of the bed, I burned up more of that leftover wrong shade of light blue. In the end I painted everything but the inside of the cab and underside of the bed (did black). I used Less than 3 qts of base coat. If I’d base coated the rest the wrong color first, I could have probably done the whole truck with 2 quarts of base.

 

[Ajax19]

The Wesco guys in Auburn are helpful and not pretentious.
Red is the most expensive color you can buy.
I’ll reserve comment about spending many hours and $ to get a vehicle ready to paint and then using cheap oil based paint. But it doesn’t make sense for about all the reasons one can think of.
@Girth i know you’re now on short clock weather wise, but reccomend Tamco and with their frequent sales, you could get one of a few different types of high quality 2k urethane red for around $300/gal. Probably be double much that for shop line PPG Omni at Wesco. Pre Covid, it was about $60 for a half pint of maroon metallic single stage Omni at Wesco.
Burb takes alot of paint though! Youd need 2 gallons at least of single stage and probably use every drop of it and be sweating it. Even more if it’s cheap paint. So the Wesco guys aren’t totally wrong from an economical standpoint. You could base coat it easily with a gallon of base and have enough leftover to fix every whiskey dent for the next 15 years. And clear coat is about half the price of red ss or base. It makes sense financially and durability wise to do base/clear.
That financial gap narrows with cheaper colors but the other advantages of 2 stage are still the same.
I’m assuming you just want a bright red or are you matching a factory color?
Another way to save a buck is get some cheaper urethane base or single stage preferably base and basically guide coat the vehicle first so your top coat base or single stage will cover quicker.
Just some thoughts, paint is expensive. Cheap paint is disappointing in the long run but there are ways to save a buck.
For example when I did the blue truck, I “accidentally” used the wrong color base coat on the first panels I “tested” on. Got the wrong shade but went ahead and base coated the the underside of the hood and inside of tailgate and some misc trim pieces. It was close and what I found is the right color covered MUCH quicker. Took one less coat. So when I did the inside of the bed, I burned up more of that leftover wrong shade of light blue. In the end I painted everything but the inside of the cab and underside of the bed (did black). I used Less than 3 qts of base coat. If I’d base coated the rest the wrong color first, I could have probably done the whole truck with 2 quarts of base.

The Paint might be cheap but it's meant for equipment and is a hell of a lot stronger then you think I'm putting my truck in the trees and bushes everyday the only thing it didn't hold up was to the 3/4 DG and mud flinging from doing 4wd launches out back but I guarantee no paint will that's where Bedliner comes in but it would mess with the look of my flames I seriously doubt your beating on your truck like mine

 

[Grit dog]

The Paint might be cheap but it's meant for equipment and is a hell of a lot stronger then you think I'm putting my truck in the trees and bushes everyday the only thing it didn't hold up was to the 3/4 DG and mud flinging from doing 4wd launches out back but I guarantee no paint will that's where Bedliner comes in but it would mess with the look of my flames I seriously doubt your beating on your truck like mine

Nope I’m definitely not. Especially the blue one! It’s a pavement princess. I wouldn’t even want to scratch the tires! Lol
What I said wasn’t an affront to you or your truck. And if I was painting an off road wheeler or a bulldozer I’d just use some Agricultural paint too. I don’t doubt that it’s relatively durable and sticks to whatever it’s painted on.
My comment was in a different regard. The appearance/shine long term UV/weather/birdshit/road tar/etc resistance.
And that’s all relative to what you want out of a paint job.
My assumption was if a guy was doing detailed bodywork, built a spray booth in his yard, gonna be his wife’s rig and reasonably spent a long time prepping it for paint that the appearance and longevity would be primary.
Not going to get that with some cheap Ag paint. I suck at painting but with enough wet sanding and cut/polish I can make something that you can see your reflection in the paint and a piece of spinach in your teeth if you’re smiling looking at your handwork. And that paint (clear) will have far better UV, moisture, stain, color fade, oxidation resistance.
If it didn’t, new cars would show up at the dealership covered in Rustoleum because car mfgs sure aren’t going to spend more than they have to on materials. But they don’t, because those cars wouldn’t have near as good of appearance or longevity.
That’s all I was trying to say.
Cheers! Your truck is bad ass,