What have you done to your square lately??

[78C10BigTen]

JB Weld is good for a lot of applications. Some particular applications may or may not work well, or could be the prep. It was originated in my home town. Sulphur Springs, Texas.

https://en.wikipedia.org/wiki/J-B_Weld

Apparently not for this... failure again.

You must be registered for see images attach

 

[Goldie Driver]

Apparently not for this... failure again.

You must be registered for see images attach

Liking this so I can unlike this - BOO !

Took me like 3 tries, too ...

 

[78C10BigTen]

Liking this so I can unlike this - BOO !

Took me like 3 tries, too ...

Im going to apply WAY more this time... it did hold but not long

 

[gotyourgoat]

Im going to apply WAY more this time... it did hold but not long

With the right stuff you don't want a bunch of glue on there. Just a light even coat on the metal puck, press hard to squeeze excess out and tape it up for a day.

 

[C10MixMaster]

I have to ask. All you guys that are lucky enough to have ac, WHY is it so common to remove it?! I’m over here wanting ac and everyone else is trying to get rid of it.

Personally A/C was one of the first things i put back on my truck. we see a lot of triple digit temps and it kinda sucks without ac.

 

[fmxr47]

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[Frankenchevy]

changed the inductive delay value for my timing control. was actually losing around 3* at 4000rpm. now it's spot on.

boring, I know...lol

 

[Big Chip]

You must be registered for see images attach

Sent from my iPhone using Tapatalk

Challenger?!? Didn’t that blow up? That’s as bad as naming a plane Pathfinder.

 

[82sbshortbed]

My wiper arms finally came in

You must be registered for see images attach

So hot new blades and ready to go.
@gotyourgoat

I have to change out the wiper assembly because they ****** the old one up.

You must be registered for see images attach

But luckily my neighbor France gave me a good used one in the bed full of parts. Yea!

You must be registered for see images attach

Anyone else do this job and have any tips would be appreciated.

You must be registered for see images attach

Also got this tire shine that I used to use at the detail shop that's $25 a gallon. I sprayed them 2 weeks ago and they still look fresh. That shuts badass!!

 

[78C10BigTen]

Whats the shine called??

 

[73c20jim]

Unloaded 3500 pounds of RR ties with wife. Took a couple of hours. Need them for retaining wall.

Gauges still need help. Will call Intellitronix tomorrow. Keep forgetting the time difference. Hope to have them working for tomorrow's trip to town.

 

[82sbshortbed]

Whats the shine called??

You must be registered for see images attach

You must be registered for see images attach

Here's the link.

https://www.texbrite.com/shop/auto-...ke-ready/tire-dressing-make-ready/majic-shine

You must be registered for see images attach

Here's the type spray bottle I use. Just set it to a fine spray and spray the tire. Or you can use a sponge to apply. I use cheap dish washing sponges for that. I just spray them with the bottle if I'm not going to drive it for a few hours. If you wanna drive after washing then use a sponge to apply.

All their product is professional grade. I used it when I had my detail shop. The waxes, compounds, degreaser and more work great. I like meguires and mother's from the local stores but, this stuff is way better. You can trust me on that. Get what ya pay for.

 

[82sbshortbed]

Man my thumb looks ****** up. Lol

Why like that?

 

[legopnuematic]

Picked up a CB for the 79, Late 70's JCPenney 6221 radio, its in really nice shape and does work. Took a little bit of deoxit in the pots but it came to life.

You must be registered for see images attach

 

[78C10BigTen]

Well no pics because i was annoyed. Come out to go home from work, turn the key... nothing. I left the damn lights on all day.