What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joshua Keith

Full Access Member
Joined
Aug 28, 2019
Posts
380
Reaction score
552
Location
Memphis
First Name
Joshua
Truck Year
1985
Truck Model
K10
Engine Size
350
Got the hood back on the truck, need to make a few gap adjustments and do a little more buffing. But it's gon' be good enough!

You must be registered for see images attach
Whoooa. Is that OEM color WA8915??
 

QBuff02

I like Big Blocks and I cannot lie
Joined
Feb 28, 2017
Posts
867
Reaction score
1,598
Location
Central IL
First Name
Quincy
Truck Year
1982
Truck Model
K30
Engine Size
454
Whoooa. Is that OEM color WA8915??

Yes it is Gunmetal but not sure if it's actually an original color for an '82. What I do know is the truck has an older repaint and as I learned through doing some touch up this winter the color was painted over a black base and where I blended the two on the sides of the body you can hardly tell the difference, but when I painted the hood separate and I used gray primer- you can tell it ended up probably 2 shades lighter in color. My wife has consistently told me she wants to see the truck all black when I redo the body next winter, but after seeing the color of the hood and how nice the color came back on the rest of the truck when I did a little resto work on it this winter I think we're going to keep it this color but do it again over a black base like it currently is. It's got a couple different hues to it depending on daylight and since polished up I really like it now!
 

Slybeanx

Full Access Member
Joined
Sep 29, 2020
Posts
122
Reaction score
101
Location
Maryland
First Name
Chris
Truck Year
1987
Truck Model
R1500
Engine Size
v6
My black mirrors are already dull af from the sun. Anything to bring back the shine or do I just live w them/ buy something else?

4 months sitting outside i guess was too much to ask.
 

The88

Mhmm
Joined
Dec 9, 2015
Posts
1,074
Reaction score
1,363
Location
South Louisiana
First Name
ThatGuy
Truck Year
88
Truck Model
K5
Engine Size
5.7
Well today it got a set of MSD 8.5mm wires, MSD Blaster coil, drag link, fuel filter and removed the front bumper to prep to install a hidden winch and raise it up bc of a body lift.

Also found the **** plastic capped radiator is leaking like a siv. So ordered a 3 row aluminum replacement with e fans and switch.

While replacing the fuel filter found it was slam packed with crud so I may have to drop the tank and clean it up.

Also while I was at it on ordering junk I picked up a jet 6 pack and a throttle body spacer.

Ahh and one more thing to add the wife ordered me the other day a 40" light bar. She saw it on a flash deal and thought of me. So I am thinking of putting that guy on top of the front bumper or behind the grill. Decisions decisions.
 

JeffK10America

Supporting Member
Supporting Member
Joined
Oct 31, 2020
Posts
334
Reaction score
721
Location
Easley sc
First Name
Jeff
Truck Year
1985
Truck Model
K10
Engine Size
350
Got the hood back on the truck, need to make a few gap adjustments and do a little more buffing. But it's gon' be good enough!

You must be registered for see images attach
Sharp truck !
 

CoggedBelt75

Full Access Member
Joined
Jul 31, 2010
Posts
40,334
Reaction score
166,033
Location
Oklahoma
First Name
Joe
Truck Year
1975
Truck Model
C10
Engine Size
383
Got the bumper brackets powder coated...I'm getting better at it. Trying to talk my wife into letting me get a bigger oven, so I can do bigger stuff...lol
I can’t blow the pic up enough to see the gun. Is it from Eastwoods? I’ve been thinking about trying theirs out.
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,321
Reaction score
10,214
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
I can’t blow the pic up enough to see the gun. Is it from Eastwoods? I’ve been thinking about trying theirs out.

Yes it is a Eastwood. I started years ago with a HF, it well you get what you pay for. So I bought my first Eastwood powder coating gun. It was the single volt nothing special. It worked better, and I still have it. Than I started doing more pieces, and Eastwood put on sale the dual volt powder coating gun, and that is the one I'm using now. I buy all of my powder from PrismaticPowers.com. They are a bit more in price, but have far superior quality. Flows better, lays out better, and they are always having some sort of sale.

I have done quite a few pieces now, and the key is making sure the piece is clean, just like a paint job. I have a sandblasting cabinet, that is stage 1. Every piece gets pre gassed, that's stage 2. Every piece gets cleaned with a good degreaser while wearing rubber gloves, that's stage 3. Follow the directions for the powder is key. Granted more all cook the the same time, and same temp. There are a few that are different.

I like the fact that I can powder coat any piece that can fit into a standard kitchen oven. I do have my own oven out in my shop. DO NOT USE THE ONE YOU EAT OUT OF! I would like a bigger oven so I can do larger pieces. I just don't think the wife is going to let me do that right now...she wants to redo the spare bathroom...AGAIN!!! LOL
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,321
Reaction score
10,214
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
My black mirrors are already dull af from the sun. Anything to bring back the shine or do I just live w them/ buy something else?

4 months sitting outside i guess was too much to ask.

Powder coat them, with a UV protectant.
 

Mr Clean

Super Moderator
Staff member
Super Moderator
Joined
Aug 18, 2010
Posts
10,321
Reaction score
10,214
Location
North East Texas
First Name
Shawn
Truck Year
1982 & 1985
Truck Model
K10 Extra Cab w/ Proper SWB, & 85 K5 Blazer
Engine Size
454 BBC, & 383 Stroker
Well today it got a set of MSD 8.5mm wires, MSD Blaster coil, drag link, fuel filter and removed the front bumper to prep to install a hidden winch and raise it up bc of a body lift.

Also found the **** plastic capped radiator is leaking like a siv. So ordered a 3 row aluminum replacement with e fans and switch.

While replacing the fuel filter found it was slam packed with crud so I may have to drop the tank and clean it up.

Also while I was at it on ordering junk I picked up a jet 6 pack and a throttle body spacer.

Ahh and one more thing to add the wife ordered me the other day a 40" light bar. She saw it on a flash deal and thought of me. So I am thinking of putting that guy on top of the front bumper or behind the grill. Decisions decisions.


LOL see what you get for wanting to do a tune up?
 

The88

Mhmm
Joined
Dec 9, 2015
Posts
1,074
Reaction score
1,363
Location
South Louisiana
First Name
ThatGuy
Truck Year
88
Truck Model
K5
Engine Size
5.7
LOL see what you get for wanting to do a tune up?
Yeah that is definitely my fault. I should have let her ride lol.

Also found the blower stopped working and my damn windows don't work either. I think it is from rain water in the door so that will have to get torn apart as well.
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
Added an oem grille and step bumper to my 78 K30

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
I was going to say that's not an oem that's an era correct ugly tube grill, then I went down. Haha. I got rid of the exact grill off mine a year ago. I have the same style step bumper...and same thing first pic I was like that's not a step bumper? That looks so much better than that original car style bumper.
 

80BrownK10

Full Access Member
Joined
Oct 22, 2019
Posts
1,878
Reaction score
1,247
Location
Greenwood, SC
First Name
Nate
Truck Year
1980
Truck Model
K10
Engine Size
350
Kinda crazy that you removed the bumper that everyone else prefers to install. Makes more sense on a 1-ton though.
I like the step bumper more as well. The other looks out of place to me. It also helps to step up to get things out of the bed or to get into the bed....no I'm not really short either at 6'2"
 

Lil'm

Full Access Member
Joined
Mar 4, 2017
Posts
444
Reaction score
1,258
Location
Lake Bluff il
First Name
Vince
Truck Year
1979 1980
Truck Model
K10 shorts
Engine Size
350
My black mirrors are already dull af from the sun. Anything to bring back the shine or do I just live w them/ buy something else?

4 months sitting outside i guess was too much to ask.


Some polish & a buffer should bring them right back.
 

Slybeanx

Full Access Member
Joined
Sep 29, 2020
Posts
122
Reaction score
101
Location
Maryland
First Name
Chris
Truck Year
1987
Truck Model
R1500
Engine Size
v6
Installed my new front sway bar, installed my new interior pieces, headliner looks good.

the reproduction trim pieces don’t line up, don’t fit well and pretty much are garbage.

now gunna look for a junkyard set unless someone has a better alternative

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach

Not on installation instructions so im going on a limb here, in order to get the best results, should I tighten up the sway bar a bit before I take it off jacks and then fully torque it to spec? Or tighten to spec on jack stands? (its only slightly lifted maybe 1-2 inches.

I figure itd be best to torque down at actual right hight....
 

Latest posts

Forum statistics

Threads
44,162
Posts
950,638
Members
36,273
Latest member
dannyphx
Top