Weld or Panel Adhesive?
- Thread starter Snoots
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
AKguy
Full Access Member
- Joined
- Feb 16, 2019
- Posts
- 543
- Reaction score
- 892
- Location
- Alaska
- First Name
- Randy
- Truck Year
- 1981
- Truck Model
- K30 Crew Cab Silverado
- Engine Size
- 460
Yes. I had to cut for, and install, two replacement panels around my fuel tank fillers. Flanged and used the Norton adhesive. Was very slick.
wanderinthru
Full Access Member
- Joined
- Jul 23, 2020
- Posts
- 1,174
- Reaction score
- 2,079
- Location
- Mid Point Route 66
- First Name
- Shakey
- Truck Year
- 81, 70, 75, 84, 89
- Truck Model
- K 10, C 30, K 20
- Engine Size
- 350
Never on on a truck. Have used alot of adheisive on aluminum trailers (semi types) If it's clean and given time to set, it don't fall off for sure.
- Joined
- Aug 3, 2010
- Posts
- 30,446
- Reaction score
- 28,352
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
Many many times over the years, yes. I've only ever used the 3M brand adhesive, #8115. I've not ever used anything else.
Doppleganger
Full Access Member
- Joined
- May 24, 2019
- Posts
- 12,707
- Reaction score
- 58,942
- Location
- OH-MI: Just like it sounds
- First Name
- Chris
- Truck Year
- 1985
- Truck Model
- K20
- Engine Size
- 5.7
Used 3M MANY times. Stuff is midevil and works awesome. IIRC it has a 35mph crash test rating.
FWIW....its what they use to build airplanes now. Found that a bead of this stuff and a row of rivets is 75x stronger than spot welds that create hot spots and microscopic tensile strength issues.
Its what I'm going to use to re-install my dash (adhesive/rivets).
FWIW....its what they use to build airplanes now. Found that a bead of this stuff and a row of rivets is 75x stronger than spot welds that create hot spots and microscopic tensile strength issues.
Its what I'm going to use to re-install my dash (adhesive/rivets).
waterpirate
Full Access Member
- Joined
- Jan 2, 2019
- Posts
- 930
- Reaction score
- 2,230
- Location
- delaware
- First Name
- Eric
- Truck Year
- 1987
- Truck Model
- v10
- Engine Size
- 5.7 tbi
My entire truck was done with panel adhesive. Rockers, cab corners, floor, ect. Worked like a dream.
Eric
Eric
Keith Seymore
Full Access Member
- Joined
- Jul 13, 2015
- Posts
- 2,881
- Reaction score
- 9,144
- Location
- Motor City
- First Name
- Keith Seymore
- Truck Year
- 1987
- Truck Model
- R10
- Engine Size
- 4.3L
Me too. Cab corners and below the trim on one box side.
It's been 13 years and still looks brand new.
K
It's been 13 years and still looks brand new.
K
Intro from an old Assembly Plant guy - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 4- Intro from an old Assembly Plant guy The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board
67-72chevytrucks.com
Intro from an old Assembly Plant guy - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 5- Intro from an old Assembly Plant guy The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board
67-72chevytrucks.com
Midnightmoon
Full Access Member
- Joined
- Oct 11, 2020
- Posts
- 1,105
- Reaction score
- 3,176
- Location
- Pennsylvania
- First Name
- Justin
- Truck Year
- 1979
- Truck Model
- C10
- Engine Size
- 305
I did rockers on one of my Rams last year with adhesive. I'm very happy with the results.
Randy and Easton
Full Access Member
- Joined
- Feb 6, 2021
- Posts
- 900
- Reaction score
- 1,303
- Location
- North Richland Hills, Texas
- First Name
- Randy
- Truck Year
- 1976
- Truck Model
- C-10 LWB
- Engine Size
- 350
Hey Y’all, just dropping in on this thread. Confirm for me what y’all are referring to is 3M panel adhesive #8115? Sounds like we need this for cab cowl to firewall. We think there might be a leak there.
Randy and E
Randy and E
AKguy
Full Access Member
- Joined
- Feb 16, 2019
- Posts
- 543
- Reaction score
- 892
- Location
- Alaska
- First Name
- Randy
- Truck Year
- 1981
- Truck Model
- K30 Crew Cab Silverado
- Engine Size
- 460
Yes, after using the adhesive on my panels seemed like a good idea to apply it to the outside seams in liberal amounts and let it run downhill. Worked well.
Randy and Easton
Full Access Member
- Joined
- Feb 6, 2021
- Posts
- 900
- Reaction score
- 1,303
- Location
- North Richland Hills, Texas
- First Name
- Randy
- Truck Year
- 1976
- Truck Model
- C-10 LWB
- Engine Size
- 350
Well, we think we may have had a leak cowl to firewall in front of passengers seat behind glove box. That was before sandblasting and all the paint work we did. He used a very liberal amount of flex seal in cowl area. Fast forward 8 month later and he just washed it for the first time since paint and we found a small leak on passengers side side wall so we think that one is windshield but we did not have time to track I it down (its on the punch list. We plan on doing a leak test and check the cowl drains (never did that before) first, then move on to the windshield. Has brand new Precision self locking seal, so if it is still leaking on passengers side we will pull seal back and seal under the seal between window frame and seal.
Any ideas about what product to use there is appreciated. We used BASF NP 1 on the cab floor and bed seal lines and it worked great. All help appreciated
Randy and E
Any ideas about what product to use there is appreciated. We used BASF NP 1 on the cab floor and bed seal lines and it worked great. All help appreciated
Randy and E
Attachments
Last edited:
Mjholly
Junior Member
- Joined
- Mar 21, 2022
- Posts
- 4
- Reaction score
- 3
- Location
- Ny
- First Name
- Mike
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 350
Any good automotive seam sealer will work u just have to find where it is comin in.i just went though this wth my 84 cleaned old caulk from firewall and cowl panel. Applied 3m seam sealer. Where the vent is on passenger side u have to stick your hand up and follow the seam down and seal it cause it will run down and sit under the heater core seam and and Eventually rot a hole in the seam. So I ran a bit of sealer inside the vent where the water comes down from the cowl. I would check the seam behind the heat box . Good luck
