Upgraded steering gear selection

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

John Reason

Junior Member
Joined
Jun 25, 2017
Posts
21
Reaction score
17
Location
Bath, NC
First Name
John
Truck Year
84
Truck Model
K10
Engine Size
5.7
I've got a 83 Chevy K10 that is lifted with 35x12.50 R15 tires. I carried my truck into the shop to look at the leaking steering gear and he told me he would need to replace the entire box cause the seals were shot. Said to not buy the AutoZone or other parts store replacement. Said I needed one that was upgraded for off-road use. Now keep in mind this truck is not a mud truck. It is being built to play around and enter into car shows. I have been looking on the internet for information and have not had much luck. I'm looking for some guidance and what to replace my stock steering box with which can hold up. I'm tired of it leaking on my garage floor. I need help.
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,101
Reaction score
3,119
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
I've heard good things about PSC steering boxes- but I do not own one. Instead I've went thru several O'reillys ones that are crap. Someday I'll get a good one when I go to cross over steering.

http://offroaddesign.com/catalog/PSCsteering.htm
 

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
912
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
:welcome:
 

Obwonkonobe

Full Access Member
Joined
Feb 21, 2017
Posts
531
Reaction score
116
Location
AZ
First Name
Ethan
Truck Year
78
Truck Model
C10 custom deluxe
Engine Size
350
I've got a 83 Chevy K10 that is lifted with 35x12.50 R15 tires. I carried my truck into the shop to look at the leaking steering gear and he told me he would need to replace the entire box cause the seals were shot. Said to not buy the AutoZone or other parts store replacement. Said I needed one that was upgraded for off-road use. Now keep in mind this truck is not a mud truck. It is being built to play around and enter into car shows. I have been looking on the internet for information and have not had much luck. I'm looking for some guidance and what to replace my stock steering box with which can hold up. I'm tired of it leaking on my garage floor. I need help.
I will say this for autozone, I used their rebuilt one on my c10 and its worked fine. I dont abuse it as much as a 4x4 but it is a daily. Plus if it does leak, They should replace it for free. And its not the worst part to put in and out
 

rpcraft

Full Access Member
Joined
May 31, 2016
Posts
1,333
Reaction score
512
Location
Texas
First Name
Robert
Truck Year
1985
Truck Model
Jimmy
Engine Size
LS 6.0 364 CID
I'd look at a PSC steering box as an upgrade for your bigger tire and suspension setup. Pricing for the unit isn't really terrible considering how high some of the high performance units are and my understanding is that with the PSC item if it fails I think they have really outstanding CSR's. One other thing I would check for and have done, if it has not been already, is the frame reinforcement kit. No sense installing a 370 dollar steering box and then turn around and crack the frame... Just my $02. I think you can get the reinforcement parts off ebay or amazon for around 60 USD too.

PSC steering box: http://www.pscmotorsports.com/80-91-gm-4wd-truck-suv-steering-gear.html
 

rpcraft

Full Access Member
Joined
May 31, 2016
Posts
1,333
Reaction score
512
Location
Texas
First Name
Robert
Truck Year
1985
Truck Model
Jimmy
Engine Size
LS 6.0 364 CID
You already have one post people are replying on, You might want to delete this one and not double post for ease of reconciliation.
 

animal

Super Moderator
Staff member
Super Moderator
Joined
Jul 30, 2010
Posts
5,604
Reaction score
3,849
Location
Georgia
First Name
Lee
Truck Year
1986
Truck Model
c10 silverado
Engine Size
350ish
You already have one post people are replying on, You might want to delete this one and not double post for ease of reconciliation.
Threads merged and cleaned up :waytogo:
 

Chevynut46

Full Access Member
Joined
Apr 17, 2018
Posts
51
Reaction score
26
Location
Levittown, Pa
First Name
Chris
Truck Year
1975
Truck Model
k25
Engine Size
350
off road design has a good steering box brace for about a 100 buckls IIRC. I personally went with a psc steering box with the ports in it for hydro assist if I ever wanted to go that route.. Do it once kinda thing.. I understand budgets though, so its not for everyone. I see nothing wrong with a regular reman from a parts store for just a normal daily
 

highdesertrange

Full Access Member
Joined
Dec 19, 2013
Posts
1,066
Reaction score
211
Location
kalifornia
First Name
mike
Truck Year
1978
Truck Model
k30
Engine Size
454
go to a medium/heavy truck repair shop and ask who does their steering boxes. then take it there and get it rebuilt. the places that rebuild the boxes for medium and heavy trucks don't mess around and do half ass rebuilds. I had mine done last year and it cost 240 bucks. highdesertranger
 

yevgenievich

Full Access Member
Joined
Mar 1, 2014
Posts
4,819
Reaction score
3,400
Location
Place
First Name
Name
Truck Year
Year
Truck Model
Model
Engine Size
Size
I tried autozone route and it did not work out even after couple of returns. Vote for proper rebuild
 

John Reason

Junior Member
Joined
Jun 25, 2017
Posts
21
Reaction score
17
Location
Bath, NC
First Name
John
Truck Year
84
Truck Model
K10
Engine Size
5.7
Thanks for all the advice. Sorry for the double post. First one I hit the post button too soon without clicking the tracking option.
 

dougbert

Full Access Member
Joined
Nov 2, 2015
Posts
659
Reaction score
175
Location
5535 feet in Utah Mountains
First Name
doug
Truck Year
1984
Truck Model
K1500/nv4500/np241c/33x12.50x16/4.10 Gears 14BFF
Engine Size
5.3L - 2002 Silverado, rebuilt top end, long tube headers
any mid level gear box recommendations out there, way above Autozoo and below the PSC?
 

rpcraft

Full Access Member
Joined
May 31, 2016
Posts
1,333
Reaction score
512
Location
Texas
First Name
Robert
Truck Year
1985
Truck Model
Jimmy
Engine Size
LS 6.0 364 CID
FWIW, PSC is actually the mid-level. There are some other brands that are about 200 bucks more.
 

Jerry phillion

Full Access Member
Joined
Aug 10, 2017
Posts
131
Reaction score
43
Location
Saginaw, mi.
First Name
Jerry
Truck Year
87
Truck Model
R10
Engine Size
350
Does GM or any other company make a quicker steering box,
Like the newer trucks have, that will fit a 87 r10 swb 2wheel
Drive truck.
 

Forum statistics

Threads
44,173
Posts
950,874
Members
36,290
Latest member
Pilotanpia
Top