Transfer Case Crossmembers & Skid Plates

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Preston Tucker

Full Access Member
Joined
May 13, 2020
Posts
106
Reaction score
50
Location
Maine
First Name
Preston
Truck Year
1974
Truck Model
K20
Engine Size
350
@Preston Tucker my K30 has the W crossmember and it's above the frame rail. I would think due to the fact my frame is deeper than your K20, you should have it below.
Ok thanks, nv4500 guys if you could chime in here that would help me soo much.
 

Preston Tucker

Full Access Member
Joined
May 13, 2020
Posts
106
Reaction score
50
Location
Maine
First Name
Preston
Truck Year
1974
Truck Model
K20
Engine Size
350
Ok thanks, nv4500 guys if you could chime in here to verify this it would help me soo much.
 

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,869
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
I have a sm465 to an np208 and the crossmember sits below the frame rail but it was a swap. It’s also backwards... either way... I have the w one. K25
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Im doing an Nv4500 swap and I got my nv4500, 205 t case and its all married together and mocked up in the frame without a cross-member on jack stands and blocking. I went to a local yard and got the top crossmember in this picture. I did some reading and was pointed towards this one. Called the s type? Well i have it all in there with the tranny sitting on the cross-member but theres no body on it so i dont know if the tranny cross-member is supposed to be mounted above or below the frame rail for height clearance. I have it on top currently and i feel like its supposed to be under. Whos done this before?
Im using the nv4500 mount bushing mount that was in the truck i stole it out of for fitment.

You must be registered for see images attach
I've seen it done both ways, so do it which ever way you need it done to give you the correct angle. The angle is way more important than above or below and why they come factory with a spacer incase you need to make it even lower.
 

Mango

Full Access Member
Joined
Dec 22, 2021
Posts
216
Reaction score
165
Location
JacksonWyoming
First Name
Gil
Truck Year
1989
Truck Model
1500
Engine Size
350
The one on my '89 has a similar shape to the one above but isn't exactly the same. It has two drain holes in the bottom and mounts with just the four bolts on the crossmember.
Looking for one for my 89???
 

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,869
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350

Forum statistics

Threads
44,162
Posts
950,641
Members
36,275
Latest member
2manysquares2care
Top