The dumbest purchase you ever made

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

dajn37

Full Access Member
Joined
Jan 1, 2019
Posts
290
Reaction score
220
Location
Minnesota
First Name
David
Truck Year
1987
Truck Model
R10 scottsdale
Engine Size
305
How big is the camper? You could do airbags and just deflate for cruising around.
It's monster fifth wheel. The guy I bought it from told me it weighs around 10,000. Pounds. That's the other problem with my half ton. It's a tbi 305 and 700r4. Which I am fine with for cruising but clearly not a pull setup. And it runs and shift so good, I am not pulling them out. My r20 is tbi 350. Turbo 400. 14 bolt full float. So it's not the greatest setup but it's enough. A friend of mine has pulled it a few times for me with his 99 3/4 ton 2wd dodge. Cummins. That pulls it beautifully. But I dont like asking people for favors. So I need to get something done before spring
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,828
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
It's monster fifth wheel. The guy I bought it from told me it weighs around 10,000. Pounds. That's the other problem with my half ton. It's a tbi 305 and 700r4. Which I am fine with for cruising but clearly not a pull setup. And it runs and shift so good, I am not pulling them out. My r20 is tbi 350. Turbo 400. 14 bolt full float. So it's not the greatest setup but it's enough. A friend of mine has pulled it a few times for me with his 99 3/4 ton 2wd dodge. Cummins. That pulls it beautifully. But I dont like asking people for favors. So I need to get something done before spring
Yeah that tax that truck pretty hard. Lol
 

dajn37

Full Access Member
Joined
Jan 1, 2019
Posts
290
Reaction score
220
Location
Minnesota
First Name
David
Truck Year
1987
Truck Model
R10 scottsdale
Engine Size
305
Here is a pic of it. Gvwr is 13k I believe. Like I say, it weighs around 10k empty .

You must be registered for see images attach
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,828
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
Here is a pic of it. Gvwr is 13k I believe. Like I say, it weighs around 10k empty .

You must be registered for see images attach
Get yourself a fatass to pull it around.
 

dajn37

Full Access Member
Joined
Jan 1, 2019
Posts
290
Reaction score
220
Location
Minnesota
First Name
David
Truck Year
1987
Truck Model
R10 scottsdale
Engine Size
305
Last thing and I will stop. Lol. I should have just bought a smaller bumper pull camper. But it's nice to have the fifth wheel. I spend a lot of time in it for work. And the price was hard to pass on for it.
 

trukman1

Full Access Member
Joined
Apr 20, 2018
Posts
340
Reaction score
138
Location
USA
First Name
Gary
Truck Year
1988
Truck Model
K5 Blazer
Engine Size
5.7 L (350)
Well babies are loud and they smell funny so I wasn’t into that lol

I've got kids and wasn't into that either...that's what the wife was for!

Oddly enough, nowadays all the young guys I see say crap like "we're pregnant" :banghead: and when the babies need changed the mom's tell the dad's and they gleefully take the baby and change the diapers. WTH??? :baby: There's some serious lack of testosterone going on nowadays!
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,775
Reaction score
1,004
Location
North Texas
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
Hate say this, but I paid too much for my 82 C10 five years ago. Then with the swap from 250 six & manual trans to 350 & auto trans & steering column, I nearly doubled my "investment". Over the years I have installed new front & rear brakes, dropped spindles, dropped hangers, along with all new steering and suspension parts. Now I'm replacing the entire wiring harness.

I probably have $7000-$8000 total "invested" in a base truck that's worth maybe $5000. My buddies say it's a hobby, just like golf, where I shouldn't expect to get my money back. That does make me feel a little better -- I guess.:rolleyes:
 
Last edited:

dajn37

Full Access Member
Joined
Jan 1, 2019
Posts
290
Reaction score
220
Location
Minnesota
First Name
David
Truck Year
1987
Truck Model
R10 scottsdale
Engine Size
305
Hate say this, but I paid too much for my 82 C10 five years ago. Then with the swap from 250 six & manual trans to 350 & auto trans & steering column, I nearly doubled my "investment". Over the years I have installed new front & rear brakes, dropped spindles, dropped hangers, along with all new steering and suspension parts. Now I'm replacing the entire wiring harness.

I probably have $7000-$8000 total "invested" in a base truck that's worth maybe $5000. My buddies say it's a hobby, just like golf, where I shouldn't expect to get my money back. That does make me feel a little better -- I guess.:rolleyes:
A bunch of the guys I work with have near brand new pickups. One of them bought a four door gmc Denali 3/4 ton diesel. Brand new. Awesome pickup no doubt but it was around $80,000. So basically he needs to work non stop to pay for all of his stuff. I would rather be in mine or your situation. What good does it do to have this 80k pickup that all you do with it is drive it to work. I would rather be in a square I over paid for and on the golf course
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,040
Reaction score
15,333
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
Hate say this, but I paid too much for my 82 C10 five years ago. Then with the swap from 250 six & manual trans to 350 & auto trans & steering column, I nearly doubled my "investment". Over the years I have installed new front & rear brakes, dropped spindles, dropped hangers, along with all new steering and suspension parts. Now I'm replacing the entire wiring harness.

I probably have $7000-$8000 total "invested" in a base truck that's worth maybe $5000. My buddies say it's a hobby, just like golf, where I shouldn't expect to get my money back. That does make me feel a little better -- I guess.:rolleyes:
My 2 cents here is it may be a "hobby" to others, but just remember some people collect stamps and coins and ****.
Nothing wrong with that, and they very well may be valuable, but to the right person of course.
What I'm saying here is, you may have spent alot of money on your "hobby" but to the right person that hobby could be worth alot of money.
Not to mention the time you put into it. That's time you'll never pay for, no matter if someone else did it 10x better, it's YOUR time.
Special value in homemade projects IMO
My project I have I'd say I may easily have over 15k in right now and most people would think it to be ridiculous, useless, but no sweat, my build, not theirs, my money, not theirs.
Someone wants to drop 500$ on a collectable model car, by all means, just don't **** on my parade when I spend x amount on my project.

Sent from my SM-G965U using Tapatalk
 

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
3,101
Reaction score
5,778
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
A bunch of the guys I work with have near brand new pickups. One of them bought a four door gmc Denali 3/4 ton diesel. Brand new. Awesome pickup no doubt but it was around $80,000. So basically he needs to work non stop to pay for all of his stuff. I would rather be in mine or your situation. What good does it do to have this 80k pickup that all you do with it is drive it to work. I would rather be in a square I over paid for and on the golf course
I totally agree. I own trucks that I have built or bought used. I would not want to be burdened with a huge vehicle payment. New trucks are pretty much a social statement anymore.
 

Honky Kong jr

Super Sarcastic Man
Joined
Jun 14, 2016
Posts
14,968
Reaction score
9,828
Location
Denver,PA
First Name
J-me
Truck Year
87
Truck Model
V10
Engine Size
Lil BB 407
I totally agree. I own trucks that I have built or bought used. I would not want to be burdened with a huge vehicle payment. New trucks are pretty much a social statement anymore.
Well said!!!!!
 

84 M1008

Full Access Member
Joined
May 11, 2018
Posts
363
Reaction score
197
Location
New York
First Name
Wayne
Truck Year
1984
Truck Model
M1008 K30
Engine Size
6.2 diesel
Buying a truck sight unseen.
You must be registered for see images attach
 

dajn37

Full Access Member
Joined
Jan 1, 2019
Posts
290
Reaction score
220
Location
Minnesota
First Name
David
Truck Year
1987
Truck Model
R10 scottsdale
Engine Size
305
Buying a truck sight unseen.
You must be registered for see images attach
What was the main issue that you had buying it sight unseen? And trust me, I know how shady some people are and how they will lie and hide things. That's one thing I will never do when i sell something even if it's going to cost me.
 

84 M1008

Full Access Member
Joined
May 11, 2018
Posts
363
Reaction score
197
Location
New York
First Name
Wayne
Truck Year
1984
Truck Model
M1008 K30
Engine Size
6.2 diesel
It looked pretty good. Ends up the seller lied about everything.
 

84 M1008

Full Access Member
Joined
May 11, 2018
Posts
363
Reaction score
197
Location
New York
First Name
Wayne
Truck Year
1984
Truck Model
M1008 K30
Engine Size
6.2 diesel
My 86 M1031 was a different story. I bought that from the Steel Soldiers site when I was active there. That truck was more than I had expected. It was mint. Wish I still had it.
You must be registered for see images attach
You must be registered for see images attach
 

Latest posts

Forum statistics

Threads
44,163
Posts
950,648
Members
36,276
Latest member
2manysquares2care
Top