Right rear locking up long before other brakes applied..

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Christian Nelson

Full Access Member
Joined
Sep 8, 2011
Posts
296
Reaction score
34
Location
Wisconsin
First Name
Christian
Truck Year
77
Truck Model
K15
Engine Size
400
Really scratching my head on this one.

Just got another truck, an 84 1/2 ton.

I barely touch the brake pedal, and the right rear locks up HARD..

Bled the brakes, checked for adjustment, spun the adjusters, etc nothing frozen. From what I can tell, no air in the system, the lines don't look pinched, etc. I get a nice squirt of fluid from both rears. I get fluid from the fronts too, and the other brakes do apply when I depress the pedal further, but when I barely touch the pedal the right rear locks right away. I even adjusted the shoes way down, and after about 2 presses, it was right back to locking up..

I even checked to see if someone put both front shoes on one side, and both rears on the other side. All looks good.

I haven't replaced all the parts yet. I figure if I am going to do that, I will just switch to rear disks.

Anyone have any ideas of what to check?
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,809
Reaction score
6,738
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
My first thought was contaminated liner material.
 

350runner

Full Access Member
Joined
Feb 9, 2013
Posts
2,858
Reaction score
224
Location
tx
First Name
Ceasar
Truck Year
82
Truck Model
c10
Engine Size
350
Shoes on backwards?

Sent from the dust in front of you!
 

Christian Nelson

Full Access Member
Joined
Sep 8, 2011
Posts
296
Reaction score
34
Location
Wisconsin
First Name
Christian
Truck Year
77
Truck Model
K15
Engine Size
400
My first thought was contaminated liner material.

Don't see any, both sets of shoes look the same, no sign of leaking axle seals, or cylinder..

Shoes on backwards?

Sent from the dust in front of you!

Short is in front, long is in back on both sides..

I tell ya, this ones got me puzzled!! Can't be proportioning valve, because it's only one sid eon back. It's just a "T" fitting back there!!

Part of me is wondering if the line is plugged on one side, but I get a pretty good squirt of fluid from the bleeder on both sides. Both cylinders are moving, checked with drum on and off. Even switched the sides the drum was on!

Sprayed brake cleaner on everything to get a good look. Now, we have snow dumped on us. I am worried about that wheel locking up and putting me in a ditch though in the snow.

I figure I was wanting to do a disc conversion anyhow, so maybe come spring while I am doing my exhaust, I might redo the whole brake lines, etc..

But, if it's something simple, It sure would be a shame to not know what it is!!
 

J Knight

Full Access Member
Joined
Sep 8, 2011
Posts
4,298
Reaction score
141
Location
Baytown TX
First Name
John
Truck Year
82 Chevy
Truck Model
C10
Engine Size
350ci
The only thing I can think of is the left wheel cylinder might be slightly corroded just enough to not give adequate pressure to the shoes and forcing the excess pressure to the right side. Just a guess.
 

350runner

Full Access Member
Joined
Feb 9, 2013
Posts
2,858
Reaction score
224
Location
tx
First Name
Ceasar
Truck Year
82
Truck Model
c10
Engine Size
350
Sounds like a good possibility. It is very mind boggling tho

Sent from the dust in front of you!
 

89Suburban

Supporting Member
Supporting Member
Joined
Dec 7, 2010
Posts
24,809
Reaction score
6,738
Location
Southeast PA
First Name
Paw Paw
Truck Year
2007
Truck Model
Chevrolet Tahoe LT
Engine Size
5.3, 4WD
Yeah I am thinking wheel cylinder issue on one side or the other.
 

350runner

Full Access Member
Joined
Feb 9, 2013
Posts
2,858
Reaction score
224
Location
tx
First Name
Ceasar
Truck Year
82
Truck Model
c10
Engine Size
350
Well lucky it's a cheap part :)

Sent from the dust in front of you!
 

chengny

Full Access Member
Joined
Feb 22, 2012
Posts
4,084
Reaction score
1,024
Location
NH
First Name
Jerry
Truck Year
1986
Truck Model
K3500
Engine Size
350/5.7
After you have adjusted the shoes way from the drums:

I even adjusted the shoes way down, and after about 2 presses, it was right back to locking up..

Take a ride (without braking in reverse). When you get a lock-up situation, pull the drum and check the shoe/drum face clearance.

If it is now tight, look at the shoe return springs as the issue:


You must be registered for see images attach


Also check that the linings are fully bonded/riveted to the shoes.
 

highdesertrange

Full Access Member
Joined
Dec 19, 2013
Posts
1,066
Reaction score
211
Location
kalifornia
First Name
mike
Truck Year
1978
Truck Model
k30
Engine Size
454
what about the drum being out of round. highdesertranger
 

Qwk

Full Access Member
Joined
May 22, 2014
Posts
468
Reaction score
55
Location
Cincy
First Name
Craig
Truck Year
87
Truck Model
C10
Engine Size
5.7/T56
Thread back from the dead!


Did you ever figure out this issue? Mine is doing the same exact thing! I have manual brakes and I about put it on the sidewalk when I was getting off the highway!

Craig
 

Christian Nelson

Full Access Member
Joined
Sep 8, 2011
Posts
296
Reaction score
34
Location
Wisconsin
First Name
Christian
Truck Year
77
Truck Model
K15
Engine Size
400
Haven't had a chance to check this out, I blew one of the front brake lines, and it needs a starter, and a battery now, so I'm now trying to figure out what size bulk brake lines to purchase, and what size ends..

Thinking I am going to go with Nickel copper lines, so they don't rust.
 

Jarhead79

Full Access Member
Joined
Sep 2, 2015
Posts
585
Reaction score
9
Location
Mt Vernon il
First Name
Michael
Truck Year
79
Truck Model
1500
Engine Size
350
My 92 locked up randomly after hitting bumps, replace the adjusters, mine were bad and after driving they expand out and when is hit a bump its lock up!
 

Camatruder

Full Access Member
Joined
May 11, 2016
Posts
294
Reaction score
1,073
Location
Belgium
First Name
Rik
Truck Year
1991
Truck Model
K5 Blazer
Engine Size
350ci / 5.7l
I had the exact same issue and after a lot of tryal and error i had the drums machined in a shop as a last resort and all was well again.
 

Latest posts

Forum statistics

Threads
44,416
Posts
957,131
Members
36,754
Latest member
jonathanknutson
Top