Rear sway bar

[TPISly-C10]

Rear sway bar for our square not many option! Belltech got one model but a bit expensive!

any idies of witch one i can fit from other GM model or other (Dodge,Ford ect...) thx again for your help!

 

[75Monza]

Something like this maybe... https://www.classicindustries.com/product/1978/chevrolet/truck/parts/rsb471.html.
Think maybe factory bar for c20 or c30 that were the camper special models, maybe suburban would work too.

 

[C10MixMaster]

Rear sway bar for our square not many option! Belltech got one model but a bit expensive!

any idies of witch one i can fit from other GM model or other (Dodge,Ford ect...) thx again for your help!

One from a S10 blazer might work. The width lines up with the frame rails.

 

[Nonstop]

Something like this maybe... https://www.classicindustries.com/product/1978/chevrolet/truck/parts/rsb471.html.
Think maybe factory bar for c20 or c30 that were the camper special models, maybe suburban would work too.

I put a factory one on a K20 about a year or so ago. Frankly, it was a pain in the ass. It certainly helps, but needed new u bolts, plates, took some grinding, and the axle tubes are a different size than the 10 bolt. Probably best to go with the after market.

 

[Craig 85]

Addco has a 1" rear bar. $152 through SD Truck Spring. Hellwig makes an 1 1/8", but that's $288.

https://www.sdtrucksprings.com/index.php?main_page=product_info&products_id=23624

 

[RecklessWOT]

This is awesome, I've been wanting to put a rear bar on the burb for years now

 

[skysurfer]

This is awesome, I've been wanting to put a rear bar on the burb for years now

If you want a Hellwig bar you shouldn't wait too much longer, they are out of production and no longer listed on their site. There are still a few around and the cheapest price I've found is $213 w/free shipping. Check Ebay or Jegs for Hellwig 7535.

 

[TPISly-C10]

One from a S10 blazer might work. The width lines up with the frame rails.

that what i found in the junkyard, Z52 2 doors Jimmy the mesurment is perfect...and coast me $17 loll

 

[TPISly-C10]

I put a factory one on a K20 about a year or so ago. Frankly, it was a pain in the ass. It certainly helps, but needed new u bolts, plates, took some grinding, and the axle tubes are a different size than the 10 bolt. Probably best to go with the after market.

yes not easy but works! it fun to play around....too easy will be boring!

 

[TPISly-C10]

If you want a Hellwig bar you shouldn't wait too much longer, they are out of production and no longer listed on their site. There are still a few around and the cheapest price I've found is $213 w/free shipping. Check Ebay or Jegs for Hellwig 7535.

For me...over $100 for a rear sway bar kit is over price..it a simple technique to fit one...and so cheap to find in the junckyard....but its just my opinion!

 

[skysurfer]

Depends on your access to a decent junkyard. Closest one to me is a 45 minute drive and it’s 90% imports. Last time I was there they only had two well-stripped squares. Space at junkyards is like space at the grocery stores, they get filled with what sells and squarebody parts won’t keep them in business.

 

[MikeB]

I've been wanting to get the Hellwig model for lowered trucks, although the only difference may be shorter end links. I do like the tension adjustability though.

That Addco bar sure looks different. No bend to clear the center section of the axle. I wonder how it mounts.??? Just noticed Summit and Jeg's show a different picture.

Edit 10/11/2019: Turns out the Summit and Jeg's pictures are correct. Addco sent me this picture.

You must be registered for see images attach

 

[MikeB]

Just found this one by P-S-T: https://p-s-t.com/i-23157731-1-rear-sway-bar.html#!year=1982||make=CHEVROLET||model=C10 CUSTOM

 

[82Diesel]

Very interesting. Rear? Odd. Maybe for suburbans or duallys?

Sent from my LM-X420 using Tapatalk

 

[mdws1987]

I got one for the 1987 R10 from Summit Racing. Part Number ACO-951. Got it in July 2013 for $168.