Power steering bracket help:

[fussfeld]

Ok, i've forgotten to take pictures or make a drawing.

Could you post/walk me thru a step-by-step for re-assembling the power steering brackets?

This is for gen 1 small block---circa 76ish to 87 ish on the lower driver's side.

i have all the parts and actually this is for a 4.3 v-6, but it's the same as an 8 but you already knew that.....

 

[chengny]

The bracketing is slightly different depending on whether there is an A/C compressor involved - but you should be able to figure it out from this stuff:


Non A/C:

You must be registered for see images attach

Both with and without A/C:

You must be registered for see images attach

Some pictures I once took in an effort to avoid your current situation:

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

And some showing one installed (non A/C):

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[fussfeld]

Next crisis:

You know the stud that screws into the head so that the P/S pump can pivot on?

Where can i find one of these?

Yes, i've misplaced mine.

Here is a pic to clarify:

You must be registered for see images attach