Power door lock issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Raymond Reynolds

Junior Member
Joined
May 8, 2019
Posts
6
Reaction score
7
Location
Apalachin, NY
First Name
Ray
Truck Year
1987
Truck Model
GMC Jimmy
Engine Size
5.3
The power locks on the truck will only lock the doors but wont unlock. Ive already replaced both switches with brand new ones from LMC. Anyone else ever have this issue? The trucks a 1987 GMC Jimmy
 

Colin

Full Access Member
Joined
Mar 12, 2018
Posts
226
Reaction score
229
Location
Covington, GA
First Name
Colin
Truck Year
1978
Truck Model
K10 Silverado
Engine Size
350 cu. in.
Many times these issues can be traced back to a bad ground.
 

Charlie

Mopar by Birth. Chevy by Choice.
Joined
Aug 2, 2017
Posts
1,837
Reaction score
912
Location
Euless, Texas
First Name
Don
Truck Year
1974
Truck Model
Cheyenne 10 LWB
Engine Size
350/TH350/AC/4 BBL Quadrajet
:welcome:
 

gmachinz

Harnessworx Inc
Joined
Nov 10, 2012
Posts
762
Reaction score
290
Location
Iowa
First Name
Jabin
Truck Year
1986
Truck Model
K10
Engine Size
350
The ground circuit for the locks themselves is still the relay-it grounds to the dash brace through the body of the relay itself. Its a pita to get to if your interior is intact.
 

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,042
Reaction score
6,634
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
The power locks on the truck will only lock the doors but wont unlock. Ive already replaced both switches with brand new ones from LMC. Anyone else ever have this issue? The trucks a 1987 GMC Jimmy

I had an issue where the driver's door lock quit operating but the switch still worked the passenger side just fine.

It was a broken wire in the rubber boot between the door and the body.

The switch at the door has 3 wires - hot to lock, hot to unlock , and ground. Since they both work one way it seems logical to look at the wiring from the kick panels to the relay as the odds of a broken wire in the door on both sides seems remote.

Note, however, that I am an electrical amateur and maybe all wrong.

Best of luck!

Britt
 

Shorty81

Baby Boomer
Joined
Mar 19, 2018
Posts
3,102
Reaction score
5,779
Location
North West ohio
First Name
Darren
Truck Year
86
Truck Model
K20
Engine Size
496
Welcome from the Buckeye State.
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,424
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
The power locks on the truck will only lock the doors but wont unlock. Ive already replaced both switches with brand new ones from LMC. Anyone else ever have this issue? The trucks a 1987 GMC Jimmy


The fact that it locks eliminates most everything but the relay itself.. or two broken unlock wires which is unlikely. grounds are common problems but lock circuit runs through the same ground. try a new relay
 

Raymond Reynolds

Junior Member
Joined
May 8, 2019
Posts
6
Reaction score
7
Location
Apalachin, NY
First Name
Ray
Truck Year
1987
Truck Model
GMC Jimmy
Engine Size
5.3
Hi everybody, and thanks for the help! Any ideas where the relay is hiding?
 

C10MixMaster

Full Access Member
Joined
Dec 6, 2016
Posts
756
Reaction score
1,424
Location
Kingman AZ
First Name
Ben
Truck Year
1977
Truck Model
C10 BIG10
Engine Size
ZZ4 350
Hi everybody, and thanks for the help! Any ideas where the relay is hiding?


on my 77 its hiding behind the climate controls on the brake petal bracket 87 they might have found a new hiding place
 

KilgoreTrout

Full Access Member
Joined
Jan 24, 2019
Posts
846
Reaction score
897
Location
Pennsylvania
First Name
Dylan
Truck Year
1987
Truck Model
V10
Engine Size
350ci
It's up under the brake pedal. Keep looking up. It's a pain in the ass. Click the switch and trace it down.

If it helps any, your power door locks work 50% better than mine.
 

trukman1

Full Access Member
Joined
Apr 20, 2018
Posts
340
Reaction score
138
Location
USA
First Name
Gary
Truck Year
1988
Truck Model
K5 Blazer
Engine Size
5.7 L (350)
I had an issue where the driver's door lock quit operating but the switch still worked the passenger side just fine.

It was a broken wire in the rubber boot between the door and the body.

The switch at the door has 3 wires - hot to lock, hot to unlock , and ground. Since they both work one way it seems logical to look at the wiring from the kick panels to the relay as the odds of a broken wire in the door on both sides seems remote.

Note, however, that I am an electrical amateur and maybe all wrong.

Best of luck!

Britt

This is what was wrong with mine which had the same symptoms. The wires inside the boot wear through. PITA but from what I've found researching online it's fairly common in these older vehicles.
 

Kevro_N_Chevro

Full Access Member
Joined
Feb 26, 2020
Posts
54
Reaction score
28
Location
NorthEast Tacoma
First Name
Kevin Forbes
Truck Year
1988
Truck Model
V10 Suburban
Engine Size
5.7
I have been searching to find a replacement lock relay. Anyone have any recommendations


Sent from my iPhone using Tapatalk
 

gmachinz

Harnessworx Inc
Joined
Nov 10, 2012
Posts
762
Reaction score
290
Location
Iowa
First Name
Jabin
Truck Year
1986
Truck Model
K10
Engine Size
350
I have several available. Message me if you need one. $35 ea shipped.
 

Vbb199

B-rate Hillbilly Customs
Joined
Jan 12, 2018
Posts
9,046
Reaction score
15,341
Location
Salisbury NC
First Name
Vince
Truck Year
89, 79
Truck Model
89 Suburban R1500, 79 C10
Engine Size
350, 502
I have the opposite issue. Mine won't lock.

More than likely relay after doing some testing. You may also find it the truck sits for a while the battery is dead. For me , I found the relay is stuck in "lock".

If you find where it's at, show me, maybe mine is nearby. I have a parts truck I can take the relay off of.
 

Forum statistics

Threads
44,175
Posts
950,924
Members
36,294
Latest member
venom268
Top