Please help ID my axles!!

[throttle out]

I'm pretty certain my rear is a 12 bolt. But the front has me questioning my judgment a bit. When I first started trying to identify my axles, I was guessing it was a 10 bolt. But the more searching I do the more I think its a Dana 44.

Truck is a bit of a Frankenstein.

Its got an 87 R10 cab with tbi 5.7 & 700r4. I was, up in till this point calling it a 87 V10 pickup, but my understanding is that an 87 would have had a 10 bolt up front from the factory. of course there is always the chance someone swapped it out.

Thanks for your help!!

 

[Lugnut]

Look for the number 44 cast next to the drivers axle tube.

Here is a pic of mine.

You must be registered for see images

 

[throttle out]

Look for the number 44 cast next to the drivers axle tube.

Here is a pic of mine.

You must be registered for see images

Nice!
Thanks bud, will do!

 

[bucket]

It's a 44, which wouldn't be original to the truck.

 

[crazy4offroad]

44 front, 12 bolt rear. You can tell it's a 44 because it has 2 spring u-bolts on passenger side. D60 would have 1 u-bolt and then 2 bolts on the other side that run right into the carrier. Otherwise their covers look the same at a glance.

 

[throttle out]

Thanks fells.