Old Bedliners

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AlabamaDan

Junior Member
Joined
Nov 3, 2024
Posts
21
Reaction score
27
Location
Alabama
First Name
Dan
Truck Year
1980
Truck Model
C10
Engine Size
350
Hey y'all!

My truck has this old bedliner in it. (I inherited it from my Grandpa this way.) It's been in there about 20 years or more. It's very functional, but I worry and wonder if it's damaging the old bed underneath more than it protects it. Has anyone ever had one of these and is it a worry I should have? I know I could just pull it out and look, but I worry that it won't come out easy and if it does it wouldn't go back as well as it is now.

It's wet in the pic because I had just washed it. It doesn't leak, by the way.

You must be registered for see images attach
 

K5 Blazer

Supporting Member
Supporting Member
Joined
Jul 17, 2023
Posts
46
Reaction score
50
Location
Sant Cruz, CA
First Name
Holden
Truck Year
1973
Truck Model
K5 Blazer
Engine Size
6.0L LS
It looks in good shape but never can tell unless you pull it out. It does not look like it would be that hard to pull out. The bed liners that wrap underneath the top rail of the bed are more difficult to pull out.
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,981
Reaction score
2,520
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
It will come out easily, over the rail bedliners typically installed with some screws and twist to lock anchors. Usually the only "damage" caused by drop in bedliners is that they will rub the paint off the bed floor.
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
3,774
Reaction score
12,209
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
It can go either way, I've seen some trucks that are mint underneath those other than rubbed through paint and I've seen some where the plastic liner was the only floor left at all. Won't know till ya pull it and look. That one shouldn't be a problem, looks like a handful of hardware and yank it out.
 

AlabamaDan

Junior Member
Joined
Nov 3, 2024
Posts
21
Reaction score
27
Location
Alabama
First Name
Dan
Truck Year
1980
Truck Model
C10
Engine Size
350
Thanks for the encouragement. I'll yank it out and see what's what. I'm just nervous about what I might find...
 

Forum statistics

Threads
44,389
Posts
956,163
Members
36,674
Latest member
TiMiller
Top