Noob here with my 1973 Suburban

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ChicksNwaffles

Junior Member
Joined
Jun 12, 2021
Posts
10
Reaction score
41
Location
Danville, CA
First Name
Chris
Truck Year
1973
Truck Model
K20 Suburban
Engine Size
350
nice Suburban! I am pretty sure LMC sells the window rubber you are looking for.

Thanks for the reply glen. LMC has the rubber piece but it its for the 1975 and newer square bodied suburban. I am not quite sure what the exact difference is but I thought it might work for my 73, ordered them, and found that the channels for both glass and the body panel are not where they need to be. It seems that GM changed the quarter window for the 75 model year after maybe encountering some issues with the 73 and 74 design? I did encounter a lot of rot on the top side of the window frame when i removed the old rubber. Other than LMC most after market specialists seem to only offer up to 1972 and post 1975. I am at a loss where to look next. The previous owner reused the original seals but when reinstalling it they split it down the middle and re-glued it together with liquid gasket. When I first saw it I was perplexed why they would go through all that trouble and not just get new ones. I understand why now. lol
 

ChicksNwaffles

Junior Member
Joined
Jun 12, 2021
Posts
10
Reaction score
41
Location
Danville, CA
First Name
Chris
Truck Year
1973
Truck Model
K20 Suburban
Engine Size
350
@ChicksNwaffles Welcome, beautiful truck. Precision Weatherstripping has a part number, but shows out of stock. Maybe you can find another vendor that carries their products and still has it in stock.

https://www.prp.com/product/detail/106272?page=2&SearchType=AGR&sort=u.Name&paginationCount=24&year=1974&make=Chevrolet&model=C10 Suburban&type=All
Vent Glass Seal - VWB 1120 73
This piece mounts in the main part of the vent assembly of the rear doors. This single piece fits either the driver or passenger side. Our product is made from the original specs and from high quality ozone resistant materials to fit your vehicle.

You must be registered for see images attach

Thanks for the reply and the link. Unfortunately that is not the window i need a seal for. I did replace the window seals for the one you linked though! The window I am trying to repair the seals on is the rear quarter window and unfortunately they do not carry the part.
 

ChicksNwaffles

Junior Member
Joined
Jun 12, 2021
Posts
10
Reaction score
41
Location
Danville, CA
First Name
Chris
Truck Year
1973
Truck Model
K20 Suburban
Engine Size
350
If it hasn't been done already, one quick upgrade is to swap in an HEI distributor from a '75 or newer vehicle. Get the large cap version with an internal coil and only two external wires (BAT power and tach). Its an easy direct swap, and you no longer have to worry about adjusting and replacing points.


Hi Bruce, a guy at the speedshop told me the same thing. One of the first things I had to do was replace or rebuild the carb so I swapped out Carb with a new one and put in a HEI distributor.

You must be registered for see images attach
 

Octane

Full Access Member
Joined
Dec 31, 2019
Posts
2,040
Reaction score
3,634
Location
Atlanta
First Name
Eddie
Truck Year
1977
Truck Model
K10
Engine Size
350
Hey everybody - glad to have found this forum. I am new to the square body world though i did learn to drive on a 75 scottsdale back on the farm. But I am an adult in the suburbs now. I purchased a 73 super cheyenne suburban a couple years ago. I performed a few repairs on it that were in my wheelhouse and hired out some work too. My mechanic loves working on this old beast. She's good to go anywhere. Biggest puzzle piece is to locate the elusive rear quarter window seals. Anyhow, looking forward to sharing and discussing. see ya on the boards.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
It ain't no good....I'll give you $1500 for it anyway just to take it off your hands as a favor.lol
 

dvdswan

Full Access Member
Joined
Mar 11, 2014
Posts
2,366
Reaction score
2,038
Location
Port Orchard, WA
First Name
Dave
Truck Year
1978
Truck Model
K10
Engine Size
350
Welcome to the site. Super sweet Burban.
 

ChicksNwaffles

Junior Member
Joined
Jun 12, 2021
Posts
10
Reaction score
41
Location
Danville, CA
First Name
Chris
Truck Year
1973
Truck Model
K20 Suburban
Engine Size
350
Very nice - got more pics?

:)

got a few more from when i first took it home.. Ill take more pics when i get it back from shop where it is getting a new headliner.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

78C10BigTen

Full Access Member
Joined
Apr 12, 2017
Posts
16,033
Reaction score
25,590
Location
pennsylvannia
First Name
Ted
Truck Year
1978
Truck Model
C10 BIG TEN
Engine Size
350
got a few more from when i first took it home.. Ill take more pics when i get it back from shop where it is getting a new headliner.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
Damn that thing is CHERRY!!!!! :happy107:
 

mcarlo86

Full Access Member
Joined
May 17, 2019
Posts
572
Reaction score
1,064
Location
ND
First Name
Brian
Truck Year
1990
Truck Model
Suburban
Engine Size
350
What a beautiful suburban! Thanks for sharing the pics. That’s a gem.
 

Powerhouse Ranch

3G Connoisseur
Joined
Jan 6, 2021
Posts
1,467
Reaction score
2,632
Location
PA
First Name
Luke
Truck Year
1980 & 1988
Truck Model
C25 & V15
Engine Size
454 & 350
Excellent truck! I've never seen that wood grain inset. VERY nice!
 

Octane

Full Access Member
Joined
Dec 31, 2019
Posts
2,040
Reaction score
3,634
Location
Atlanta
First Name
Eddie
Truck Year
1977
Truck Model
K10
Engine Size
350
I used to tease a buddy of mine about him putting dual line carbs on his engines.I'd tell him I'll always know where to find him...at the gas pumps with the arab station owner smiling as he fills er up! Again.
 

Forum statistics

Threads
44,420
Posts
957,273
Members
36,764
Latest member
WRONGWAY2815
Top