Jrgunn5150
Questionable methods
- Joined
- Jan 11, 2016
- Posts
- 2,739
- Reaction score
- 1,412
- Location
- Ionia Mi
- First Name
- J.R.
- Truck Year
- 1979
- Truck Model
- C10
- Engine Size
- 6.slow
Agreed, your crossmember should be dropped down from the frame.
New Here and could use some help 1982 K10
- Thread starter NineLine89
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,134
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
Spacers = washers or similar here + and with longer bolts in the trans mount I think will do it.
The exhaust will not work like that. It will need a bend put in that piece to clear driveline extension. Jack it up and see for yourself. Leave the front tires on the ground...
That looks scary as hell from here. I thought 4 inch lift was all you could do without driveshaft mod..you simply MUST know how much spline in inside there. Spray paint that connection or mark it some way and disassemble it. Return with those pics. See how much has pulled out? There better be at least that much left in there.
The exhaust will not work like that. It will need a bend put in that piece to clear driveline extension. Jack it up and see for yourself. Leave the front tires on the ground...
That looks scary as hell from here. I thought 4 inch lift was all you could do without driveshaft mod..you simply MUST know how much spline in inside there. Spray paint that connection or mark it some way and disassemble it. Return with those pics. See how much has pulled out? There better be at least that much left in there.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Honky Kong jr
Super Sarcastic Man
- Joined
- Jun 14, 2016
- Posts
- 14,968
- Reaction score
- 9,828
- Location
- Denver,PA
- First Name
- J-me
- Truck Year
- 87
- Truck Model
- V10
- Engine Size
- Lil BB 407
You must be registered for see images attach
You must be registered for see images attach
This is how mine is with 6” lift. The spacers are factory but not in original position.Billyjoe12
Junior Member
- Joined
- Nov 13, 2017
- Posts
- 4
- Reaction score
- 0
- Location
- Phoenix
- First Name
- Billy
- Truck Year
- 1979
- Truck Model
- K10
- Engine Size
- 350
How do you post on here?
Honky Kong jr
Super Sarcastic Man
- Joined
- Jun 14, 2016
- Posts
- 14,968
- Reaction score
- 9,828
- Location
- Denver,PA
- First Name
- J-me
- Truck Year
- 87
- Truck Model
- V10
- Engine Size
- Lil BB 407
Ummm you just did.... lol
Billyjoe12
Junior Member
- Joined
- Nov 13, 2017
- Posts
- 4
- Reaction score
- 0
- Location
- Phoenix
- First Name
- Billy
- Truck Year
- 1979
- Truck Model
- K10
- Engine Size
- 350
No like make my own post I've been looking everywhere on here and can't find a way to post a topic
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,134
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
Last edited:
Honky Kong jr
Super Sarcastic Man
- Joined
- Jun 14, 2016
- Posts
- 14,968
- Reaction score
- 9,828
- Location
- Denver,PA
- First Name
- J-me
- Truck Year
- 87
- Truck Model
- V10
- Engine Size
- Lil BB 407
Go to the section you want and hit the “ start tread” button
Billyjoe12
Junior Member
- Joined
- Nov 13, 2017
- Posts
- 4
- Reaction score
- 0
- Location
- Phoenix
- First Name
- Billy
- Truck Year
- 1979
- Truck Model
- K10
- Engine Size
- 350
Thank you. I got it. Appreciate it!
NineLine89
Junior Member
- Joined
- Apr 10, 2017
- Posts
- 21
- Reaction score
- 18
- Location
- Florida
- First Name
- Joshua
- Truck Year
- 1982
- Truck Model
- K10
- Engine Size
- 350
The bolts you are referring to are the 4 bolts holding the crossmember to the frame correct? As far as the transmission mount it doesn’t look broken to me.
Honky Kong jr
Super Sarcastic Man
- Joined
- Jun 14, 2016
- Posts
- 14,968
- Reaction score
- 9,828
- Location
- Denver,PA
- First Name
- J-me
- Truck Year
- 87
- Truck Model
- V10
- Engine Size
- Lil BB 407
Yes mine originally had the spacers between the nut and the cross member and I moved the spacers to between the frame and cross member
Jrgunn5150
Questionable methods
- Joined
- Jan 11, 2016
- Posts
- 2,739
- Reaction score
- 1,412
- Location
- Ionia Mi
- First Name
- J.R.
- Truck Year
- 1979
- Truck Model
- C10
- Engine Size
- 6.slow
NineLine89
Junior Member
- Joined
- Apr 10, 2017
- Posts
- 21
- Reaction score
- 18
- Location
- Florida
- First Name
- Joshua
- Truck Year
- 1982
- Truck Model
- K10
- Engine Size
- 350
Alright guys am not sure if there is a spacer on the other side of the frame but if so I will swap them to between the frame and the crossmember. Also is 2” of extension on the front drive shaft ok ?
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 10,041
- Reaction score
- 10,134
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
If you mean there are 2 inches left in that shaft, past the line you marked, then yes, that should be fine. I knoe some people run lots less than that and I knew it was there, but you needed to think about it.
I would be madder than hell if all you dudes kept posting in MY thread....maybe some kind-hearted MOD will clean this up for you.
I would be madder than hell if all you dudes kept posting in MY thread....maybe some kind-hearted MOD will clean this up for you.
Iowan
Loud and Proud American!
- Joined
- Oct 12, 2016
- Posts
- 762
- Reaction score
- 214
- Location
- Iowa
- First Name
- Calvin
- Truck Year
- 1999
- Truck Model
- K1500
- Engine Size
- 350 crate
You sir, win comment of the day!Welcome sir.. I'm not into 4X4 driving, breaking and building.. But being as I'm an old fart, I can help you with the bind.. When I'm in a bind, EX-lax works every time..
