Need some help understanding turn signal lever, somethings missing?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Birglor

Junior Member
Joined
Sep 29, 2023
Posts
16
Reaction score
15
Location
Norway
First Name
Runar
Truck Year
1984
Truck Model
C20 Suburban
Engine Size
6.2
Hi.
I'm nearing the end of my project '84 burb and so I'm going over the electrical..
Most things work, but there is one that has me stumped. Not sure whether it's actually a wiring issue or mechanical.
The full beam switch position doesn't really exist, it just flaps around, no click. Luckily a small panel was missing so I got som pictures.
Wondering if there is something I'm missing or if something is broken.
There's also a metal rod that comes up inside the column that just hangs out at the 'circuit board' for the lever. Any ideas?
 

Attachments

  • Screenshot_2025-01-07-20-22-50-15_965bbf4d18d205f782c6b8409c5773a4.jpg
    Screenshot_2025-01-07-20-22-50-15_965bbf4d18d205f782c6b8409c5773a4.jpg
    40.8 KB · Views: 6
  • Screenshot_2025-01-07-20-22-47-92_965bbf4d18d205f782c6b8409c5773a4.jpg
    Screenshot_2025-01-07-20-22-47-92_965bbf4d18d205f782c6b8409c5773a4.jpg
    51.8 KB · Views: 6

carnutjw

Junior Member
Joined
Sep 18, 2024
Posts
21
Reaction score
102
Location
Evansville, IN, USA
First Name
John
Truck Year
1987
Truck Model
R20 Suburban
Engine Size
454
Yea you're missing part of the column. There should be a cover that hides the metal rod that houses a sliding piece that allows the lever to actuate the high beam rod down to the switch further down the column.
 

Birglor

Junior Member
Joined
Sep 29, 2023
Posts
16
Reaction score
15
Location
Norway
First Name
Runar
Truck Year
1984
Truck Model
C20 Suburban
Engine Size
6.2
I tried rewording my Google search and I found that the rod is for the high beam switch. Guessing Im missing something to connect the rod to the lever then.
 

Birglor

Junior Member
Joined
Sep 29, 2023
Posts
16
Reaction score
15
Location
Norway
First Name
Runar
Truck Year
1984
Truck Model
C20 Suburban
Engine Size
6.2
Yea you're missing part of the column. There should be a cover that hides the metal rod that houses a sliding piece that allows the lever to actuate the high beam rod down to the switch further down the column.
Ah, ok. So all I need is that piece, great. Happen to know what that would be called?
 

YakkoWarner

Full Access Member
Joined
May 29, 2024
Posts
203
Reaction score
283
Location
Central Texas
First Name
Wolf
Truck Year
1989
Truck Model
R2500 Suburban
Engine Size
454
Ah, ok. So all I need is that piece, great. Happen to know what that would be called?

Sounds like what you are missing is the actual high beam switch itself. If your headlights are working, it may still be hanging loose in the wiring at the base of the column since the power needs to go through it to get to the headlights.
 

carnutjw

Junior Member
Joined
Sep 18, 2024
Posts
21
Reaction score
102
Location
Evansville, IN, USA
First Name
John
Truck Year
1987
Truck Model
R20 Suburban
Engine Size
454
Here is a good resource about everything in the column and how it goes together.

Inside GM tilt steering column LINK
I was just getting ready to share that same link. Specifically pg.42-46-ish. He calls your missing part the "tilt lever housing". My Suburban was missing some of the ball bearings and the sliding pusher piece ("high beam follower"-pg. 44) when I got it. Scavenged what I needed from a buddy's parts K10. I had my column partially together/apart a few times before everything was in its proper place and functioning correctly.
 

Birglor

Junior Member
Joined
Sep 29, 2023
Posts
16
Reaction score
15
Location
Norway
First Name
Runar
Truck Year
1984
Truck Model
C20 Suburban
Engine Size
6.2
Alright, I think I found the parts.
Seems easy enough to put together, I'm hoping I can do it without tearing down anything. Somebody obviously got it off at some point, so fingers crossed.
 

Attachments

  • Screenshot_2025-01-08-08-19-17-56_40deb401b9ffe8e1df2f1cc5ba480b12.jpg
    Screenshot_2025-01-08-08-19-17-56_40deb401b9ffe8e1df2f1cc5ba480b12.jpg
    36 KB · Views: 9

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,785
Reaction score
29,359
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Alright, I think I found the parts.
Seems easy enough to put together, I'm hoping I can do it without tearing down anything. Somebody obviously got it off at some point, so fingers crossed.

I've always fought those things and they frustrate me. Good luck!

Lol, in all seriousness just work patiently and you should be fine.
 

Forum statistics

Threads
44,554
Posts
960,783
Members
37,031
Latest member
mckenziek
Top