Monster transmission?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

350runner

Full Access Member
Joined
Feb 9, 2013
Posts
2,858
Reaction score
224
Location
tx
First Name
Ceasar
Truck Year
82
Truck Model
c10
Engine Size
350
I here from my trans dude you can buy the same parts a lot cheaper else where...

Sent from the dust in front of you!
 

farmerchris

Full Access Member
Joined
Apr 14, 2012
Posts
163
Reaction score
7
Location
southeast kansas
First Name
chris
Truck Year
1973
Truck Model
K10
Engine Size
350
i use a rebuild kit for a turbo 350,good quality parts.they seem to be the parts that all the good rebuilder use.
 

Duckzunlimtd

Full Access Member
Joined
Mar 19, 2014
Posts
61
Reaction score
3
Location
South Carolina
First Name
Cole
Truck Year
1987
Truck Model
K10/V1500
Engine Size
350
Does anybody possibly have a parts list for a beefy 700r4, with a reasonable price? Pushing an estimated 420 hp and 430 tq
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
What gear ratio you running? What tire size? Why kind of rpm are you spinning? Is this for your 4x4?

Th350 conversion maybe better.
 

Duckzunlimtd

Full Access Member
Joined
Mar 19, 2014
Posts
61
Reaction score
3
Location
South Carolina
First Name
Cole
Truck Year
1987
Truck Model
K10/V1500
Engine Size
350
What gear ratio you running? What tire size? Why kind of rpm are you spinning? Is this for your 4x4?

Th350 conversion maybe better.

I believe they are 3.73 havent checked into that yet. It is currently on 33's but dont plan on going past a 35. as far as RPM my cam shafts power range will be between 1200-6800.. It probably wont see 6k often though. Im looking toward a 700r4 due to the OD being it will be my DD.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
I believe they are 3.73 havent checked into that yet. It is currently on 33's but dont plan on going past a 35. as far as RPM my cam shafts power range will be between 1200-6800.. It probably wont see 6k often though. Im looking toward a 700r4 due to the OD being it will be my DD.

Gonna be tough to get a 700r4 to hold up to all of that. If you're turning anywhere near 6000 rpm, you'll need to sleeve the input shaft and drum for certain. Beast or Smart Sunshell for certain, Vette Servo, Wide 2/4 Band and super hold Servo. The list can go on and on and at the end of the day it's still a 700r4. Although, I hope to build one strong enough for that someday. Drive it til it breaks, and build again making it stronger. Really need to consider hardened shafts too and they're not cheap.
 

Duckzunlimtd

Full Access Member
Joined
Mar 19, 2014
Posts
61
Reaction score
3
Location
South Carolina
First Name
Cole
Truck Year
1987
Truck Model
K10/V1500
Engine Size
350
It's really just going to be my DD but it will be in the woods during deer season And pulling people out any other time. Other than that it wouldn't really be abused
 

Forum statistics

Threads
44,087
Posts
949,088
Members
36,167
Latest member
DaytonaJuckes
Top