Metal Rescue Gel Rust Review

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joshua Keith

Full Access Member
Joined
Aug 28, 2019
Posts
380
Reaction score
552
Location
Memphis
First Name
Joshua
Truck Year
1985
Truck Model
K10
Engine Size
350
Had found some pretty significant rust on the roof and started looking into rust removal.
I tried Water/vinegar 4:1 but the rust was too heavy for it so I went searching some more.

Came across metal rescue gel. Not the liquid. It goes on really thick and stays in place once you lay plastic over it so it won’t dry out. These are my results after 3 coats. Each coats was covered with plastic for 24 hours and red scotch brite in between. It’s messy but won’t hurt other paint and wipes right off once you put the water hose to it.

Pre-application
You must be registered for see images attach


1st Coat
You must be registered for see images attach


2nd Coat
You must be registered for see images attach


Final Coat
You must be registered for see images attach

You must be registered for see images attach
 
Last edited:

DanMcG

Full Access Member
Joined
Jun 28, 2014
Posts
1,076
Reaction score
1,891
Location
Central NY
First Name
Dan
Truck Year
1978 1985
Truck Model
k10 k10
Engine Size
400 350
Interesting, thanks for the review
 

Corvette Ed

Full Access Member
Joined
Nov 29, 2020
Posts
3,861
Reaction score
14,647
Location
East Tennessee
First Name
Eli
Truck Year
79
Truck Model
C10
Engine Size
250
Looks like you got some good results,thanks for the write up.
 

Camar068

Supporting Member
Supporting Member
Joined
Feb 5, 2014
Posts
4,293
Reaction score
3,339
Location
Kentucky
First Name
David
Truck Year
1986
Truck Model
K10/LM7 5.3/4L60e/np208/3.73/32"
Engine Size
10 yrs Air Force
never thought about it, but what about a rust converter? Like Ospho or 1 step?

Nice work btw.
 

Joshua Keith

Full Access Member
Joined
Aug 28, 2019
Posts
380
Reaction score
552
Location
Memphis
First Name
Joshua
Truck Year
1985
Truck Model
K10
Engine Size
350
never thought about it, but what about a rust converter? Like Ospho or 1 step?

Nice work btw.

I actually have ospho and have used it on my frame and other uncommonly seen areas. I felt because it’s an acid that it was best to go with the gel as it’s not acidic. And also ospho doesn’t get as deep into the rust as I had hoped.
 

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,304
Reaction score
1,855
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
I actually have ospho and have used it on my frame and other uncommonly seen areas. I felt because it’s an acid that it was best to go with the gel as it’s not acidic. And also ospho doesn’t get as deep into the rust as I had hoped.

I use ospho or similar stuff only on light surface rust in areas where it's really hard to remove it. For that occasions it works well.
I prefer complete rust removal and high quality primer and good paint.
 

K5ride

Full Access Member
Joined
May 2, 2018
Posts
135
Reaction score
205
Location
Apple Valley, CA
First Name
Steve
Truck Year
1975
Truck Model
C10 Stepside
Engine Size
350
Does it work like Naval Jelly? I've had good success with that but I only used it for small areas.
 

Joshua Keith

Full Access Member
Joined
Aug 28, 2019
Posts
380
Reaction score
552
Location
Memphis
First Name
Joshua
Truck Year
1985
Truck Model
K10
Engine Size
350
Does it work like Naval Jelly? I've had good success with that but I only used it for small areas.

yes, but I believe naval jelly can potentially harm paint and chrome. Metal rescue is safe
 

Latest posts

Forum statistics

Threads
44,173
Posts
950,865
Members
36,288
Latest member
brentjo
Top