Is it my heater core?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dadof2

Full Access Member
Joined
Oct 31, 2014
Posts
114
Reaction score
3
Location
Central Texas
First Name
Craig
Truck Year
1991 , 1981
Truck Model
R1500 Chevy Sub, C20
Engine Size
350 in both trucks
1991 Suburban, very little heat blowing out of vents, even blocked off the grill while driving to see if I could build up heat. Temp gauge never gets above middle hash mark between 100 - 210, front floor board not wet or any other obvious signs of a coolant leak.

Thermostat sticking open?

Any thoughts appreciated.
 
Last edited:

MadOgre

Full Access Member
Joined
May 4, 2014
Posts
4,090
Reaction score
51
Location
NA
First Name
NA
Truck Year
NA
Truck Model
NA
Engine Size
NA
Its usually the culprit. make sure everything else under the hood is hooked up and functioning like the T-stat and hoses
 

Dadof2

Full Access Member
Joined
Oct 31, 2014
Posts
114
Reaction score
3
Location
Central Texas
First Name
Craig
Truck Year
1991 , 1981
Truck Model
R1500 Chevy Sub, C20
Engine Size
350 in both trucks
Thx.
 

Stroked

Full Access Member
Joined
Dec 26, 2011
Posts
2,248
Reaction score
96
Location
Beloit, Kansas
First Name
Jared
Truck Year
1984
Truck Model
K10
Engine Size
305
The 86 K10 I had in high school had those exact same problems. Bad thermostat. Replaced it and never had another bit of trouble.
 

Dadof2

Full Access Member
Joined
Oct 31, 2014
Posts
114
Reaction score
3
Location
Central Texas
First Name
Craig
Truck Year
1991 , 1981
Truck Model
R1500 Chevy Sub, C20
Engine Size
350 in both trucks
I am going to start with the thermostat first.....6.00 at local auto parts store. Then move to the heater core if it isn't the "stat".

Thx for the input.
 

MadOgre

Full Access Member
Joined
May 4, 2014
Posts
4,090
Reaction score
51
Location
NA
First Name
NA
Truck Year
NA
Truck Model
NA
Engine Size
NA
Get the fail safe ones they are a couple bucks more but they always fail in the open position instead of the closed position. No cooked engine to worry about
 

350runner

Full Access Member
Joined
Feb 9, 2013
Posts
2,858
Reaction score
224
Location
tx
First Name
Ceasar
Truck Year
82
Truck Model
c10
Engine Size
350
If it's not the stat try flushing out the core with a garden hose.

Sent from the dust in front of you!
 

marks86

Full Access Member
Joined
Feb 2, 2011
Posts
1,513
Reaction score
90
Location
Latham, NY
First Name
Mark
Truck Year
1986
Truck Model
K30
Engine Size
12v Cummins
do both heater hoses get hot?
 

Dadof2

Full Access Member
Joined
Oct 31, 2014
Posts
114
Reaction score
3
Location
Central Texas
First Name
Craig
Truck Year
1991 , 1981
Truck Model
R1500 Chevy Sub, C20
Engine Size
350 in both trucks
Well this took all day:
Get the fail safe ones they are a couple bucks more but they always fail in the open position instead of the closed position. No cooked engine to worry about
Ended up costing about 12.00, but nice to know it should fail in the open position if it goes.

If it's not the stat try flushing out the core with a garden hose. Sent from the dust in front of you!
Oh dear God was this horrible. When I bought the suburban this past March I would have thought I checked to see what the coolant looked like. Must not have because the coolant looked like the Red River....When it's RED!

I flushed everything out until I got clear water. I saved the debris so I could make my own roll of sandpaper at a later date.

Water pump looked like it had been leaking as there was rust colored crap from the weep hole and down the front of the engine, as had the T-stat housing.

So I put on a new water pump as well as a 195 degree T-stat, and of course new coolant.

Replaced the lower radiator hose, top one looked good.

Passenger side of the radiator had the same rusty crap from where the end cap meets the fins. Guess I'll start looking to see about getting a new radiator for the ol' beast.

do both heater hoses get hot?
Yes, both got hot. Air is now warmer (not saying much), but nowhere close to being warm or hot.

If nothing else our sons got to play junior mechanics w/ me.
 

350runner

Full Access Member
Joined
Feb 9, 2013
Posts
2,858
Reaction score
224
Location
tx
First Name
Ceasar
Truck Year
82
Truck Model
c10
Engine Size
350
Man I wish I could afford a place on the red river I'd stay fishing all day.... yea sounds like it was super clogged up I'd run one of those yellow bottle of radiator flush through and see what that does. Then I'd start looking into the AC/heat blend door in the duct

Sent from the dust in front of you!
 

Dadof2

Full Access Member
Joined
Oct 31, 2014
Posts
114
Reaction score
3
Location
Central Texas
First Name
Craig
Truck Year
1991 , 1981
Truck Model
R1500 Chevy Sub, C20
Engine Size
350 in both trucks
Man I wish I could afford a place on the red river I'd stay fishing all day.... yea sounds like it was super clogged up I'd run one of those yellow bottle of radiator flush through and see what that does. Then I'd start looking into the AC/heat blend door in the duct

Sent from the dust in front of you!

I was expecting to see a mud cat pop out of the dang thing at anytime.
 

350runner

Full Access Member
Joined
Feb 9, 2013
Posts
2,858
Reaction score
224
Location
tx
First Name
Ceasar
Truck Year
82
Truck Model
c10
Engine Size
350
Lol! :)

Sent from the dust in front of you!
 

MadOgre

Full Access Member
Joined
May 4, 2014
Posts
4,090
Reaction score
51
Location
NA
First Name
NA
Truck Year
NA
Truck Model
NA
Engine Size
NA
I find the RED GM dexcool anti freeze coolant works better then the old green stuff. I kept having T-stats fail until I switched to the red. I have never had one fail since switching to the red.

Even if your heater core is not leaking it still may be well beyond operational.

If you have coolant at the proper level and your engine warms to operational temp, Your heater core hoses are plumbed in the correct fashion and you still have no heat then I would say you need a new core.

All that crud is from your core/radiator and is probably plugged up good. You would need to reverse flush it by taking both hoses off the engine side and using a good pressured garden hose to back flush it and then the other way and then back flush again until you get nothing. If you have done that and still no heat then you need a new core.
 

Dadof2

Full Access Member
Joined
Oct 31, 2014
Posts
114
Reaction score
3
Location
Central Texas
First Name
Craig
Truck Year
1991 , 1981
Truck Model
R1500 Chevy Sub, C20
Engine Size
350 in both trucks
I drove it to work and back today (80 miles round trip) and the air was a little warmer than the outside air. Next day off is Tuesday so I'll see about changing the heater core then.

Again, thanks for all of the input.
 

RetroC10Sport

Supporting Member
Supporting Member
Joined
Sep 29, 2010
Posts
17,174
Reaction score
2,470
Location
Green Bastard Parts Unknown
First Name
Jay
Truck Year
2001
Truck Model
pontiac aztek
Engine Size
3.4
I wouldn't use DexKill but that's me.

I'd clean out everything around the heater core. Not sure if you can access it by taking out the blower or not. I had a 7 lb. box of crap when I cleaned mine out. Leaves and sticks can get in there and cause poor heat. The temp came up to about 75-80 at the vents before, after it was over 115.
 

Latest posts

Forum statistics

Threads
44,163
Posts
950,661
Members
36,276
Latest member
2manysquares2care
Top