erv1994
Junior Member
- Joined
- Mar 10, 2024
- Posts
- 15
- Reaction score
- 0
- Location
- Los Angeles
- First Name
- Estevan
- Truck Year
- 1986
- Truck Model
- c10
- Engine Size
- 305
AC Belt vibrations
- Thread starter erv1994
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Jgonick
Full Access Member
- Joined
- Jan 12, 2017
- Posts
- 439
- Reaction score
- 565
- Location
- West Texas
- First Name
- Joel
- Truck Year
- 1985
- Truck Model
- K10
- Engine Size
- 350
Not that this helps, but I had the same issue in the past and for the life of me I cannot remember what I did to fix the problem. I think I might of just tightened it a little and determined it wasn't going to bounce off. A year or so later, I ended up having to replace the compressor and I don't think it bounced as bad after that.
Last edited:
fast 99
Full Access Member
- Joined
- Dec 31, 2021
- Posts
- 2,244
- Reaction score
- 3,361
- Location
- Spokane, Washington
- First Name
- Brian
- Truck Year
- 81,85
- Truck Model
- K20
- Engine Size
- 350
There is a small bracket under the compressor that occasionally is left off. Will vibrate without it. Just looked at one mounted it's impossible to get a decent picture. May be someone can post an exploded view.
Other possibilities are belt as previously mentioned, bad compressor, pressures that are out of spec, high, overcharged.
Other possibilities are belt as previously mentioned, bad compressor, pressures that are out of spec, high, overcharged.
