Huck's daily - 2005 Z71 crewcab

[TotalyHucked]

After I did that, I ripped out that POS Atoto and wired up the Pioneer. Put it in and every function worked perfectly right out of the box. Shoulda never cheaped out

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[CountKrunk]

At least you can return to amazon easily.

 

[Johnny Atomic]

I've been looking for a 2wd CCSB from 2004 to 2007 (classic) for months and months, preferable GMC (and not gold or silver/gray ), there just aren't any, at any price reasonable or unreasonable.

 

[TotalyHucked]

I've been looking for a 2wd CCSB from 2004 to 2007 (classic) for months and months, preferable GMC (and not gold or silver/gray ), there just aren't any, at any price reasonable or unreasonable.

Really? If you're willing to travel, check out marketplace in the southeast. When I was looking there were tons of 2wd CCs reasonably priced. And they're typically in better shape since all the yee-yee boys want to squat a 4wd

 

[Johnny Atomic]

Really? If you're willing to travel, check out marketplace in the southeast. When I was looking there were tons of 2wd CCs reasonably priced. And they're typically in better shape since all the yee-yee boys want to squat a 4wd

I've been checking marketplace, only ones I ever find are in the Dallas/FW area and are torn up.

 

[TotalyHucked]

I had previously mentioned the roof is dead and will need to be painted, here's a better shot of that. At some point just a couple weeks after I bought the truck, I decided to hit the roof quickly with some compound to see how well it would clean up. All I was hoping for was to get it back to being red...

You must be registered for see images attach

You must be registered for see images attach

Ok, that's encouraging!

You must be registered for see images attach

That'll do pig, that'll do

You must be registered for see images attach

You must be registered for see images attach

 

[TotalyHucked]

So about 3 weeks ago, we finally had a whole weekend with no plans at all. I've been promising I'd show her how/help her to clay bar and wax her truck. It's a silver '21 F150 she bought new and it's never been coated, but it's been mostly garage kept. I needed to do a service on the red truck, so we ran up to the shop that Saturday. She washed her truck and I inspected it, taught her how to clay bar and we decided it wouldn't need any compounding/polishing (thankfully). So after that, I showed her how to properly wax it.

In between all of that, I threw new belts on mine and changed the oil

You must be registered for see images attach

I missed...

You must be registered for see images attach

The motor is leaking from everywhere, rear main, front seal, oil pan and valve covers. So come spring time or early summer, it'll get yanked for a reseal, cam and trunnion upgrade. Then it'll get painted Chevy red-orange cuz that's what I have for paint

You must be registered for see images attach

While the motor is out, the whole engine bay will get scrubbed/repainted/fresh firewall heat shielding applied and harness reloomed with braided loom cuz the original split loom is all brittle and falling apart.

You must be registered for see images attach

 

[TotalyHucked]

We ran out of time on Saturday to finish her truck so we came back on Sunday to finish up the last side and while we were waiting on the wax to set up, I grabbed the buffer and hit my hood real quick. You can see how much brighter it is than the fender

You must be registered for see images attach

Well, since I got started and already had all the stuff out, gotta finish it. I'll just do a little at a time each day till it's done

You must be registered for see images attach

Started on the driver's side by removing that god awful pin-stripe with an eraser wheel

You must be registered for see images attach

Very messy but better already

You must be registered for see images attach

 

[TotalyHucked]

Here's some close up shots to show you the paint on the sides of the truck. Hard water spots, swirls, scratches galore. I had 2 different Chemical Guys compounds in my arsenal (these are from before CG stuff started to go downhill, once these are gone I'll get getting some other stuff from our local bodyshop supply store), their VSS and C4. Tried both, the VSS did ok, but the C4 knocked it out of the park so that's what I stuck with

You must be registered for see images attach

You must be registered for see images attach

Roughly the same spot on the door before...

You must be registered for see images attach

After 1 pass of the C4...

You must be registered for see images attach

It's def single stage

You must be registered for see images attach

 

[TotalyHucked]

Before on the bedside...

You must be registered for see images attach

After...

You must be registered for see images attach

So this is 2 passes with the CG C4 compound on their orange medium/heavy cut hex pad on a 5" orbital. VERY pleased

You must be registered for see images attach

Pass bedside, you can see all the haze and branch scratches. This is how the whole truck looked...

You must be registered for see images attach

Driver's side after 2 rounds of the C4 compound with the orange hex pad, 1 round of CG's V38 polish on their white medium polish hex pad and then top coated with Griot's Garage Ceramic All-in-One wax machine applied with a CG blue wax pad

You must be registered for see images attach

 

[TotalyHucked]

Pass front door. Decent reflection, but lack of clarity...

You must be registered for see images attach

Oh yeah, that's what I'm talkin 'bout

You must be registered for see images attach

I even buffed out the chrome in the side trim

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[TotalyHucked]

I know I'm beating this like a rented mule but I just can't get over the difference in this paint! I've been kinda bummed on the truck ever since I bought it, worrying that the paint wouldn't clean up. Now I'm STOKED on this truck

Can't read the bucket...

You must be registered for see images attach

BAM!

You must be registered for see images attach

You must be registered for see images attach

So then last weekend I had a chance to do the passenger side and tailgate. I brought everything home so I could work there

You must be registered for see images attach