Horn stuck on. Help pls!

[Jcj1986]

I changed the ignition switch on the back of the column on my 86 which solved the issue but when i put it all back together as soon as i hooked the battery back up the horn was blaring. I disconnected the batt and pulled the fuse, reconnected the battery and put the fuse back in and as soon as the fuse was inserted the horn was stick blaring again. I checked the pressure plate and contact as well the button and there were no issues i could see. Tghis truck has recently had the lock cylinder replaced but the horn worked fine until i put the ignition switch in. Could it be the way the high beam switch is setting?Any help is appreciated!

 

[bucket]

If it didn't do it before, it could be related to the ignition switch replacement. Maybe a wire got pinched somewhere? I'd revisit that area.

 

[Charlie]

 

[Joe T]

Did you try punching the steering wheel in anger a few times and shooting it the bird?

Welcome

 

[78C10BigTen]

Did you try punching the steering wheel in anger a few times and shooting it the bird?

Welcome

That actually has worked for me

 

[Big Chip]

Just try looking really pissed when you drive so it seems like it’s on purpose.

 

[Joe T]

xc_hide_links_from_guests_guests_error_hide_media

 

[Jcj1986]

It was a shorted wire. I noticed on of the screws arced and the horn sounded when i went to inspect the contact.