Guess The Tool

[Vbb199]

Btw it has nothing to do with vehicles...

A nut somewhere on a conduit panel, maybe the screw in style connectors.....
Just REALLY BIG
500+ volts LOL

Sent from my SM-G965U using Tapatalk

 

[78C10BigTen]

A nut somewhere on a conduit panel, maybe the screw in style connectors.....
Just REALLY BIG
500+ volts LOL

Sent from my SM-G965U using Tapatalk

Lol nope. Not electrical either. Mechanical...

 

[Vbb199]

Big pipe nut at the top of the urinal?

I know it's not THAT big lol

Sent from my SM-G965U using Tapatalk

 

[78C10BigTen]

Big pipe nut at the top of the urinal?

I know it's not THAT big lol

Sent from my SM-G965U using Tapatalk

Way to think outside the box lol i posted it simply because not many here will have come in contact with the machine it was made to be used on. And yes clearly its a huge honkin ass wrench! Lol

 

[Vbb199]

Way to think outside the box lol i posted it simply because not many here will have come in contact with the machine it was made to be used on.

I see the sprocket, something chain driven, presumably with that size 80 capacity

Sent from my SM-G965U using Tapatalk

 

[78C10BigTen]

I see the sprocket, something chain driven, presumably with that size 80 capacity

Sent from my SM-G965U using Tapatalk

Was waiting to see somebody catch that clue

 

[Vbb199]

Was waiting to see somebody catch that clue

Chain driven stuff would be farm equipment, or mfg'ed stuff on a assembly line, but beyond that, I'm beat

Sent from my SM-G965U using Tapatalk

 

[Josh Helm]

Pinion holder?

 

[78C10BigTen]

I see the sprocket, something chain driven, presumably with that size 80 capacity

Sent from my SM-G965U using Tapatalk

That spocket has an adjustable clutch in it behind that big ass nut! We had no wrench to tighten the slipping clutch, so we fabbed one out of 1/2" steel diamond plate and put a 3" pipe custom made to fit over the handle and gorilla gripped the **** outta it! Btw this is a columbus mckinion tire shredder machine.

You must be registered for see images attach

 

[Josh Helm]

Brookfield Dial Reading Viscometer

Bingo ! It is a visco meter

 

[Vbb199]

That spocket has an adjustable clutch in it behind that big ass nut! We had no wrench to tighten the slipping clutch, so we fabbed one out of 1/2" steel diamond plate and put a 3" pipe custom made to fit over the handle and gorilla gripped the **** outta it! Btw this is a columbus mckinion tire shredder machine.

You must be registered for see images attach

Yeah I would've never guessed that

Sent from my SM-G965U using Tapatalk

 

[78C10BigTen]

The tires come up the belt on the right into the shredder box, down through the knife rollers and into a classifier that sends big pieces back up to be re-shred. The clutches on the in feed rollers were slipping, hence why we made a one off custom wrench

 

[Josh Helm]

And the other is a depth mic and gauge blocks I use it daily as well

 

[Josh Helm]

I could get you guys with countless eltrical testing equipment ... but it's not interesting in explaining there tasks ... lol

 

[73c20jim]

You must be registered for see images attach

Here's something I use often in my job ... i am a quality tech ...

Isn't that the wrong finger to use?