Grille Color

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AKguy

Full Access Member
Joined
Feb 16, 2019
Posts
543
Reaction score
892
Location
Alaska
First Name
Randy
Truck Year
1981
Truck Model
K30 Crew Cab Silverado
Engine Size
460
So far, nothing in my “ Tool shed” uses the 7.62x39!
 

Soundmound

Supporting Member
Supporting Member
Joined
Feb 15, 2022
Posts
1,809
Reaction score
5,468
Location
North Central Washington
First Name
Dave
Truck Year
1984
Truck Model
Scottsdale
Engine Size
305
Question: I am getting my grille stripe repainted while the roof is getting fixed. So, I figure now's a good time to restore my grille. I mean one busted tab and one crack at the top you can't even see, it's a no brainer. Funny thing is everyone says Argent Silver, but my grille appears darker. I wiped the dust off a protected section and it appears a lot darker to me vs. Argent. No signs of it having been painted either. I guess it could be a repop since it has speed clips and not the plastic inserts. Screws were correct though. Were there other grille colors in '84?
You must be registered for see images attach
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,615
Reaction score
28,848
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
The '83-'84 grilles were indeed a darker shade than argent silver. They were more of a graphite color. Also to note, it was just the higher trim level grilles, with the 4 headlights like yours.
 

RecklessWOT

Full Access Member
Joined
Feb 20, 2015
Posts
2,556
Reaction score
4,764
Location
New Hampshire
First Name
Kevin
Truck Year
1987
Truck Model
V10 Suburban Silverado
Engine Size
350 TBI
The '83-'84 grilles were indeed a darker shade than argent silver. They were more of a graphite color. Also to note, it was just the higher trim level grilles, with the 4 headlights like yours.
'83-'84 silverado grille was the best damn nose of all the square light trucks IMO. Quite nice looking being that darker shade and with the strip all the way across the middle
 

Soundmound

Supporting Member
Supporting Member
Joined
Feb 15, 2022
Posts
1,809
Reaction score
5,468
Location
North Central Washington
First Name
Dave
Truck Year
1984
Truck Model
Scottsdale
Engine Size
305
The '83-'84 grilles were indeed a darker shade than argent silver. They were more of a graphite color. Also to note, it was just the higher trim level grilles, with the 4 headlights like yours.
I'm honored I think? So new rabbit hole I guess, as I need to find that color in a rattle can.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,615
Reaction score
28,848
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I'm honored I think? So new rabbit hole I guess, as I need to find that color in a rattle can.

Not just the correct color, but the correct amount of low gloss too. Lol, yep... rabbit hole.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,086
Reaction score
12,465
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
I'm honored I think? So new rabbit hole I guess, as I need to find that color in a rattle can.

If you want it to last, find the color but not Homie Deport rattle can…IMO.
Fwiw, if you do end up going argent and are on the wet side in the near future, I have some quality base coat (Dodge Light driftwood metallic) that I painted a truck with and since then have used it as an argent color in multiple applications. I’ll give you some.
Example headlight buckets here. I did not clear them as they are basically junk anyway but they were painted black then blue then black again when we bought the 86. I sanded the peeling crap off of them and gave a quick coat of that silver just so they wouldn’t embarrass me driving it!

You must be registered for see images attach
 

Finkaire

Finkaire
Joined
Dec 28, 2021
Posts
454
Reaction score
747
Location
California
First Name
Loren
Truck Year
1984
Truck Model
Silverado c10
Engine Size
305
It is a little darker. Mine is a GM reproduction from LMC, very pleased. Had the center painted with the truck, favorite grill as well!
 

Attachments

  • 8D948C38-FFFC-4C9C-B17F-25C7215E5F06.jpeg
    8D948C38-FFFC-4C9C-B17F-25C7215E5F06.jpeg
    153.7 KB · Views: 54
Last edited:

Craig 85

Full Access Member
Joined
Jan 25, 2017
Posts
3,918
Reaction score
4,126
Location
Nashville, TN
First Name
Craig
Truck Year
1985
Truck Model
K30 SRW
Engine Size
454/TH-400/NP205
I always like the color of the 83-84 grills. I first found a vinyl for the center bar then found a paint to match. It's not totally correct for an '84, but close. I used Duplicolor Perfect Match Chrysler Charcoal Gray Metallic (AA9, PA9) #BC0331 and did not clear coat it. It has a semi matte finish.

Here's some different lighting photos of mine. the first and last pictures are about 3 years apart. The truck sits outside.

You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
 

Soundmound

Supporting Member
Supporting Member
Joined
Feb 15, 2022
Posts
1,809
Reaction score
5,468
Location
North Central Washington
First Name
Dave
Truck Year
1984
Truck Model
Scottsdale
Engine Size
305
I think my grille must be a repop. No plastic inserts uses the speed clips instead and I realize I don't have the fancy brightwork on the edge of the grille either like some of you fellas do. I mean it looked fine to me and I only just now noticed it when looking back to match the paint. Hell anything is better than it was and this isn't going to Barrett-Jackson lol.
 

Soundmound

Supporting Member
Supporting Member
Joined
Feb 15, 2022
Posts
1,809
Reaction score
5,468
Location
North Central Washington
First Name
Dave
Truck Year
1984
Truck Model
Scottsdale
Engine Size
305
Not just the correct color, but the correct amount of low gloss too. Lol, yep... rabbit hole.
I bet this would get it done. I looked at some of the photos in the reviews and it looks real close. Question is, will it hold up with all the wind, heat and insects bashing into it?

 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,615
Reaction score
28,848
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I bet this would get it done. I looked at some of the photos in the reviews and it looks real close. Question is, will it hold up with all the wind, heat and insects bashing into it?


It should hold up about as well as any other rattle can paint, I would think. But I've never used their interior type stuff on an exterior.

SEM used to offer several different shades of bumper paint. There were various grays and silvers, to match the various colors used on the steel-bumpered Econolines, hard plastic bumper assemblies on assorted front drive Ford cars and also several different furrin' cars with non-body colored bumpers.

I have no idea if they still offer them though. My newest color chip chart from them is from 2009 I think.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,086
Reaction score
12,465
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
IMO SEM is about as good as it gets for rattle can products but I wouldn’t bet it will have great longevity in an exterior application if the vehicle lives out doors and is driven regularly.
 

Latest posts

Forum statistics

Threads
44,414
Posts
956,955
Members
36,735
Latest member
rljohnson013
Top