GMC-IH

[dragstews]

The issue is removing them. Unless you are very good, cutting off the clamp, you need a new hose when done.

I heard that those clamps was a one-time usage ...

Going to run the ugly, being if there is ever a future need to remove the hose won't be spending $20+ for a new clamp and possible a new hose ..

Old truck needs a little ugly on it to keep it humble ..

You must be registered for see images attach

 

[dragstews]

Added a mount to the tube,,
This bolts to the back of the head ...

You must be registered for see images attach

Dipstick is rock solid now ...

You must be registered for see images attach

Time for the juice !
Going to take bout 10 qts to fill it up ..

 

[dragstews]

Since the starter was off the motor, thought it would be wise to take a look at it's guts ...

You must be registered for see images attach

A little clean up won't hurt a thing ...
( Tools came over on the 'Mayflower' )

You must be registered for see images attach

 

[Robert Bare]

Ah a growler and a mica undercutter/lathe!

 

[dragstews]

Ah a growler and a mica undercutter/lathe!

Back to like new ...

You must be registered for see images attach

Did replace the solenoid with a new one just because the old one has a lot of years under it's belt and a new set of bushes are thrown into the soup too ..
Should see many more years of service ..

You must be registered for see images attach

Bushes still had some life left in them ...
Bout half way worn out ...