GMC-IH

[dragstews]

Got lucky on the starter side ..
Motor to trans strut rod was a plug & play fit ..

You must be registered for see images attach

Not so lucky on the oil filter side ..
Oil pan will need some mods in order for the rod to bolt up ...

You must be registered for see images attach

You must be registered for see images attach

Must modify the corner of the pan ...
Be some work to do, but at this point I'm all in !!

 

[dragstews]

Whoa ... Here's some ugly !!

You must be registered for see images attach

At the moment at least .. Will pretty it up when it's taken off the motor ...

Been whooping on it ..
Kind of sad to go mutilating a brand new high dollar oil pan, ya know ...
Going to weld in a patch, but first it's going back on the motor for a trial fit .. I think there's room, but want to make sure before I make up the patch and weld ..

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

Some putty, some paint = done ...

 

[dragstews]

Bondo hides all sins ....

You must be registered for see images attach

So does JB Weld !!