cbrown5385
Full Access Member
- Joined
- Apr 11, 2023
- Posts
- 102
- Reaction score
- 350
- Location
- Mass
- First Name
- Corey
- Truck Year
- 1990
- Truck Model
- Suburban 1500
- Engine Size
- 350
Hey guys is it possible to wire a fuel cells level sender into the stock gauge?
Fuel cell to stock gauge
- Thread starter cbrown5385
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Robert Bare
Full Access Member
- Joined
- Sep 13, 2020
- Posts
- 107
- Reaction score
- 166
- Location
- MT
- First Name
- Robert
- Truck Year
- 1978
- Truck Model
- k20
- Engine Size
- 5.7
Yes. As long as you get the proper sender. Generally fuel cells come with a universal sender, which may not be the right ohms.
75gmck25
Full Access Member
- Joined
- Oct 13, 2016
- Posts
- 2,263
- Reaction score
- 2,206
- Location
- Northern Virginia
- First Name
- Bruce
- Truck Year
- 1975
- Truck Model
- K25 Camper Special TH350 NP203
- Engine Size
- 5.7
GM fuel sending units are 0-90 ohms. If you can get a sending unit with similar specs, it should work fine. Wire from gauge cluster goes to the sending unit positive, and sending unit should be grounded to the frame.
