Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

hatch87

Junior Member
Joined
Jan 16, 2025
Posts
4
Reaction score
0
Location
tn
First Name
Jackson
Truck Year
1987
Truck Model
1500
Engine Size
350 5.7
1987 with a 350 tbi
It gave me a short code about a month ago (24) and 44 I believe. One is the TPS and the other is running lean. About 2 weeks ago it was running good and fine and once it got warm it became choppy under load and once it got warmer it was choppy any time you gave it gas. Put a new fuel filter in it and injectors and rebuilt the TBI and cleaned it. Put it back together ran fine for an hour and it began to do the exact same thing now. Installed a new TPS after getting another code 24 and that didn’t help. It is now giving me a code 12 so I put a new coil on it that didn’t help. The code 12 the distributor not communicating with the ECM. All said and done now fuel pump is not pumping any fuel at all. Any thing would help thank you all
 

gmbellew

Full Access Member
Joined
May 27, 2018
Posts
1,263
Reaction score
1,361
Location
Kansas city
First Name
glen
Truck Year
1990
Truck Model
suburban 1500
Engine Size
350
Code 12 is the "all good" code. Any blown fuses? Particularly ECMB?
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,131
Reaction score
3,154
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Fuel pressure? Should be 9-13 although I have seen GM TBI that ran poorly at the lower spec.

Check grounds.

Please do not toss any more parts at it. Part quality is poor. It is possible to create an additional problem and make diagnosis more difficult.
 

hatch87

Junior Member
Joined
Jan 16, 2025
Posts
4
Reaction score
0
Location
tn
First Name
Jackson
Truck Year
1987
Truck Model
1500
Engine Size
350 5.7
Even with the check engine light still on? It’ll go through it’s codes blinking 1 then 2 times
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,131
Reaction score
3,154
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Code 12 indicates there are no stored codes. If present, system will flash codes from the lowest number first. You probably inadvertently disconnected the battery.
 

hatch87

Junior Member
Joined
Jan 16, 2025
Posts
4
Reaction score
0
Location
tn
First Name
Jackson
Truck Year
1987
Truck Model
1500
Engine Size
350 5.7
I did change the battery out but the check engine light is still on
 

gmbellew

Full Access Member
Joined
May 27, 2018
Posts
1,263
Reaction score
1,361
Location
Kansas city
First Name
glen
Truck Year
1990
Truck Model
suburban 1500
Engine Size
350
If the check engine light is still on, there should be a code stored. It will flash 12 three times, then each code three times, then 12 three times again.
 

hatch87

Junior Member
Joined
Jan 16, 2025
Posts
4
Reaction score
0
Location
tn
First Name
Jackson
Truck Year
1987
Truck Model
1500
Engine Size
350 5.7
Yes and when it does that it flashes 12 but I could be mistaken it may not be doing it when it’s running it runs so rough I may not notice
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,131
Reaction score
3,154
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Check engine light on has stored code. Doesn't need to be running to retrieve code. Will be stored for around 50 key cycles if it doesn't re-occur.
 

Latest posts

Forum statistics

Threads
44,627
Posts
963,020
Members
37,184
Latest member
andrewosb
Top