Dana 60 hubcaps.

[Strick]

They have a deeper lip and I believe a larger diameter knockout than a 3/4 ton hubcap with a 10 bolt or D44 axle.

Those wheel covers flare out in the center. Man, they look fantastic! Evidently the junk that I have are wheel covers with just the centers cut out. I only have a set for the smaller 10 Bolt and 1 set for a Dana 60, but neither look like that or look that great. Wow, I wish I had a set of full covers that shiny for my dad's old C20. Thanks for the pic.

Strickland

 

[AyWoSch Motors]

So after some researching, I think I found all the hub caps and variants.

Half ton chevy 2wd, or 4wd rear:

You must be registered for see images attach

Half ton chevy 4wd front:

You must be registered for see images attach

Half ton GMC 2wd, or 4wd rear:

You must be registered for see images attach

Half ton GMC 4wd front:

You must be registered for see images attach

Half ton Chevy or GMC 4wd long hub:

You must be registered for see images attach

 

[AyWoSch Motors]

Continued...

3/4 or 1 ton Chevy 2wd, or 4wd rear:

You must be registered for see images attach

3/4 or 1 ton GMC 2wd, or 4wd rear:

You must be registered for see images attach

3/4 or 1 ton Chevy or GMC, 4wd front, 10bolt:

You must be registered for see images attach

3/4 or 1 ton Chevy or GMC, 4wd front, D60:

You must be registered for see images attach

And I don't have a clue what this is....

You must be registered for see images attach

I think I got all that right.

 

[Grit dog]

niiiice!
would love to get a set in good shape as them

Not mine. Just a pic off the web.

 

[oldretiredafguy]

Continued...

3/4 or 1 ton Chevy 2wd, or 4wd rear:

You must be registered for see images attach

3/4 or 1 ton GMC 2wd, or 4wd rear:

You must be registered for see images attach

3/4 or 1 ton Chevy or GMC, 4wd front, 10bolt:

You must be registered for see images attach

3/4 or 1 ton Chevy or GMC, 4wd front, D60:

You must be registered for see images attach

And I don't have a clue what this is....

You must be registered for see images attach

I think I got all that right.

I just love knowing a true picker~!~

 

[bucket]

Continued...

3/4 or 1 ton Chevy 2wd, or 4wd rear:

You must be registered for see images attach

3/4 or 1 ton GMC 2wd, or 4wd rear:

You must be registered for see images attach

3/4 or 1 ton Chevy or GMC, 4wd front, 10bolt:

You must be registered for see images attach

3/4 or 1 ton Chevy or GMC, 4wd front, D60:

You must be registered for see images attach

And I don't have a clue what this is....

You must be registered for see images attach

I think I got all that right.

That last one there, is it yours or a picture from the internet? It looks like a cap that has had the center cut out and someone took the time to roll the edge (very nicely too).

 

[AyWoSch Motors]

That last one there, is it yours or a picture from the internet? It looks like a cap that has had the center cut out and someone took the time to roll the edge (very nicely too).

Interweb, not mine. I think they went a bit big, but they did a good job.

 

[SquareRoot]

That last one there, is it yours or a picture from the internet? It looks like a cap that has had the center cut out and someone took the time to roll the edge (very nicely too).

I have been planning to do this myself. I got probably a dozen very nice rear caps. I'm pretty confident I can cut a proper size hole and then use a two-piece "buck" along with my press to make the flange followed up by a third "buck" to roll the edge over on itself. Kind of like flaring brake lines on a grand scale. lol

 

[HOTFOOT]

Interweb, not mine. I think they went a bit big, but they did a good job.

I think the center piece is missing!!! This is my 60's hub caps.

 

[bucket]

I think the center piece is missing!!! This is my 60's hub caps.

Sure looks like it!

What's the factory D60 cap look like on the back side? Is that center ring crimped on?

 

[HOTFOOT]

Sure looks like it!

What's the factory D60 cap look like on the back side? Is that center ring crimped on?

Rolled edge on inside and a larger hole.

 

[SquareRoot]

Well that's interesting. I have never seen one up close. I assumed they were one piece. That might be an advantage when it comes to modifying them?

 

[84GMCSierra]

Thats all the ones I have. Got enough for a c25 gmc, a k20 gmc, or a k20 chevy, and half a half ton gmc, haha

What do these Dana 60 caps look like? I'm unfamiliar.

You must be registered for see images attach

My 84 Sierra has the ones on your top row. Wish mine were in as good of shape, lol