boloboss
Full Access Member
- Joined
- May 6, 2023
- Posts
- 70
- Reaction score
- 17
- Location
- Houston Texas
- First Name
- Shuntel
- Truck Year
- 1984
- Truck Model
- Chevy C10
- Engine Size
- v8 350 5.7 liz6er
Thats DEEP @Ricko1966
Thxxxx
Thxxxx
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
BSCan't happen in 1406 so irrelevant.
I agree,I prefer a mechanical pump and have always told everyone that's what to run,and they will run 2x4s or 3x2s,But try buying one today,that has correct fuel pressure and is assembled correctly,it is more likely you will get a bad one than a good one..BS
That chinese carp has no check valve. Only Rochester's came with check valve fuel filters.
I can show you a dozen 1400 Chinabrocks that all leak down. We install bass check valves in them. The check valves wear out in 4-5 years and you have to replace them.
BTW did you know Chinabrock discontinued the 1400 series? NO Parts, no more, and AFB parts do not fit.
The fuel pump check valves are known to blow out due to FOD (foreign object damage).
Now and Then in Maine sell rebuild kits for all AMERCIAN made fuel pumps.
DO NOT put an eclectic fuel pump on a carbed engine. The machinal stock fuel pump will run everything short of dual quads.
I had luck with Carter pumps, all working without flaw. Fuel pressure ratings and real pressure is not matching most of the time. That's why I run fuel pressure regulators.I agree,I prefer a mechanical pump and have always told everyone that's what to run,and they will run 2x4s or 3x2s,But try buying one today,that has correct fuel pressure and is assembled correctly,it is more likely you will get a bad one than a good one..
So your expierience also is that pressure isn't correct,without the use of an external presdure regulatorI had luck with Carter pumps, all working without flaw. Fuel pressure ratings and real pressure is not matching most of the time. That's why I run fuel pressure regulators.
Yes. The pressure was always 2-3 psi higher as rated.So your expierience also is that pressure isn't correct,without the use of an external presdure regulator