Cab swap Questions

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

AuroraGirl

Full Access Member
Joined
Sep 8, 2019
Posts
9,693
Reaction score
6,869
Location
Northern Wisconsin
First Name
Taylor
Truck Year
1978, 1980
Truck Model
K10, K25
Engine Size
400(?), 350
In Kansas it's a felony to swap the VIN tags. You can go to the Highway Patrol with some forms and money etc and they will renumber your cab. As for me I've never messed with the VINs but on those 2or3 occasions that I didn't do it I swapped dashes.
then kansas should restamp the frame, tooo
and when governments make you do this kind of bs, they should be paying for it to. dont want vins swapped? Dont make a legal racket out of something like car restoration or owning an old vehicle
 

Ken B

Full Access Member
Joined
Sep 18, 2019
Posts
1,191
Reaction score
1,455
Location
indiana
First Name
ken
Truck Year
81
Truck Model
c10
Engine Size
250
Will the 81 dash fit in the 85 cab? how hard is it to do this? a few hours? days?
or in lots of cases start today end in a few weeks as other thing take precedence :33:
 

75Monza

Full Access Member
Joined
May 5, 2017
Posts
1,362
Reaction score
2,843
Location
Colville, Washington
First Name
Jeremy
Truck Year
1980, 1982, 1985
Truck Model
K30, K20, K20
Engine Size
454, 383, 350
My case is start a year ago and ponder what this massive pile of parts is supposed to be! o_O
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
If you don't mind a little drilling and welding, you can put your original dash into the replacement cab. Then you have a little more 'heritage' preserved and you don't have to do anything with the VIN's.

With the windshield removed, you can see the spot welds that fasten the dash panel to the cowl. The lower corners simply bolt to the interior of the cab.
That works for the dash mounted ones but the older squares are by the door jams.
Has 4 "rosette" rivets.
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
then kansas should restamp the frame, tooo
and when governments make you do this kind of bs, they should be paying for it to. dont want vins swapped? Dont make a legal racket out of something like car restoration or owning an old vehicle
Agree, car restoration company's probably move vins all the time without mentioning. They just use the propoer rivets or move the metal it's attached too.
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,352
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Will the 81 dash fit in the 85 cab? how hard is it to do this? a few hours? days?
or in lots of cases start today end in a few weeks as other thing take precedence :33:

Yeah, it fits just the same. It can be done in a few hours, once the glass and dash guts are out of the way. But if you were looking forward to having the newer column with multi-function stalk, it's probably not worth the trouble.

That works for the dash mounted ones but the older squares are by the door jams.
Has 4 "rosette" rivets.

Right, but the trucks in question are '81 and '85. The B-pillar VIN went away for '79.
 

Ken B

Full Access Member
Joined
Sep 18, 2019
Posts
1,191
Reaction score
1,455
Location
indiana
First Name
ken
Truck Year
81
Truck Model
c10
Engine Size
250
thanks bucket
I think that the bmv paperwork is the easier route. I like the nostalgia/historical thing but punching out the windshield and gutting the cab wiring is above my paygrade. I got my project truck from my brother ( now deceased) and I would like all the "originality" I can have but salt, rain, Indiana weather has beaten this truck up and Like I said that is something that I do not feel talented enough to tackle that.
 

75Monza

Full Access Member
Joined
May 5, 2017
Posts
1,362
Reaction score
2,843
Location
Colville, Washington
First Name
Jeremy
Truck Year
1980, 1982, 1985
Truck Model
K30, K20, K20
Engine Size
454, 383, 350
In Washington state, we just have it inspected and get a new vin/title when you build a project...as long as you had both titles to begin with. My '73 F250 highboy is that way, frame and drivetrain were '72, got rolled and needed a body. Put a '73 (next body style) rwd body on it with some mount changes since there is 5" frame width difference between the two.
 

Ken B

Full Access Member
Joined
Sep 18, 2019
Posts
1,191
Reaction score
1,455
Location
indiana
First Name
ken
Truck Year
81
Truck Model
c10
Engine Size
250
anyone have any idea how many spot welds there are to remove the entire metal dash panel ?
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,352
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
anyone have any idea how many spot welds there are to remove the entire metal dash panel ?

If I remember in the morning, I can go count them all on the dash I have removed.
 

shortarms

Member
Joined
Dec 28, 2021
Posts
36
Reaction score
8
Location
Oklahoma
First Name
Rex
Truck Year
1986
Truck Model
K10 Suburban
Engine Size
350
That would depend on the state. Out her in commifornia you need to swap em, keep your mouth shut and only you and the people that helped you haul metal around know.
it pays to know the guy that runs the crusher. Not that I'd ever do that....unless it was a dodge dakota. ;)
 

eskimomann209

Full Access Member
Joined
Jan 9, 2019
Posts
1,849
Reaction score
2,005
Location
Modesto
First Name
Marcus
Truck Year
1973
Truck Model
C10
Engine Size
5.3
anyone have any idea how many spot welds there are to remove the entire metal dash panel ?
A lot. Mine had a spot weld every inch or so
When I got it out the I took the time to rust proof it.
 

Attachments

  • C002CC0B-6F54-4C43-ABB6-D76077C1E55E.png
    C002CC0B-6F54-4C43-ABB6-D76077C1E55E.png
    844 KB · Views: 65

Ken B

Full Access Member
Joined
Sep 18, 2019
Posts
1,191
Reaction score
1,455
Location
indiana
First Name
ken
Truck Year
81
Truck Model
c10
Engine Size
250
Thanks. I got the glass out and was just noticing all the spots
 

Ken B

Full Access Member
Joined
Sep 18, 2019
Posts
1,191
Reaction score
1,455
Location
indiana
First Name
ken
Truck Year
81
Truck Model
c10
Engine Size
250
Eskimo got any pics of the dash out?
 

Forum statistics

Threads
44,173
Posts
950,857
Members
36,288
Latest member
brentjo
Top