Cab Mount Bolts/Captured Nut Loose

[hoagster]

yea it took me a couple of tries the first time. That cap locks on to the those crush pins on either side.

 

[hoagster]

If your hump is removable I would take it off to so you can access the transfer case shifter also.

 

[Ken B]

not removable. now that i have seen a video on how it works i wont be so tentative....i am not using the trans on my project but no sense in jacking it up by doing something the wrong way

 

[Ken B]

I am hoping to pull cab tomorrow, if its not raining, and if my body is willing.....crawling under and over truck and yardwork may hinder my day.....

 

[Ken B]

Anyone ever pull a cab and find a way to lay it on its back to work on the bottom side?
I cant figure out how to lay it down on back to clean and seal bottom of cab....without damaging anything

 

[hoagster]

Mine is laying on its back on a pallet, just do it gently. I'm a big guy and can do it by myself but get a friend. I usually have it on 6x6's on the rockers.
If your cab corners are rusty though you'll need more help. I'm getting ready to shoot another coat of primer on the bottom. The color and clear. It will be the first time for color and clear and I figured the bottom was the best place to try it.

You must be registered for see images attach

You must be registered for see images attach

 

[Ken B]

I got the gearshift out.....once i knew what i was doing it was simple.
my cab is rust free thats why I am harvesting from a donor.
I will get some help to lay it down on a pallet , probably lay it on some harbor frieght moving blankets for extra pad