Bucket seat belt sleeves

[Bloodhound1981]

I put Recaro bucket seats ans a Blazer console in my cab. I had my factory seatbelts redone, and I got plastic seat belt sleeves for the buckle sides, but they just flop on the floor between the seat and console when not used. Then I saw these on LMC and elsewhere:

You must be registered for see images attach

But I'm lost on how these would bolt to the floor. The belts bolt basically flat to the floor, and with these obviously it would be at an angle.

What am I missing??

 

[Rusty Nail]

Missing the fact that you'll have to bend or modify the brackets to stand them up?
Missing pictures?
Missing teeth?-I don't know!
Missed the joke?
Sometimes people miss the point.
Missed your exit?
Missed communication!
Missed opportunity
Missed the target
Missed the catch
Missed the point

Missed...??

We need a segue.

What is a segue?

You must be registered for see images attach

xc_hide_links_from_guests_guests_error_hide_media

Bet you didn't miss that.

 

[Bloodhound1981]

Missed your medication today?

 

[mlsceo]

Fab up brackets with a 90-degree twist and hole in each end. Bolt one end to the floor and the other to the belt/sleeve. Keep the brackets as short as possible and use good quality hardware.

 

[Rusty Nail]

Missed your medication today?

Maybe.
Missed dosage - good one!

What about The Mark? People miss that all the time.

 

[Rusty Nail]

Extra points? - a field goal...
I've seen those get missed before, sometimes it "goes wide".

 

[Rusty Nail]

Best I remember the sleeve had a hole on the bottom. Dontcha run the mounting bolt through it first? Seems the lack of room to flop around between the seat/console/transmission hump wasnt an issue ever. Until you took the console out, ofc. I don't think there was an additional part you're missing.
There's no pictures, so it's kinda hard to see . ??

Pictures. That's what you're missing , ol boy.
Chap.
Lad.