Brake Light Socket Issue - ?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,042
Reaction score
6,634
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
My time in the barrel for this one. If you put a new bulb in where the prongs are reversed from where the bulb will hold, it will light up for brake or hazards.

Installed correctly, it will not work- just the tail lamp glows. Since it lights up, I am assuming power/wiring is good and the socket is the issue.

I ordered a socket from LMC - pretty cheap at around 6 bux.

Sound like I am on the right track?

I am at work so cannot do much in the way of diagnostics.

Thanks!
 

squaredeal91

Full Access Member
Joined
Mar 10, 2023
Posts
2,534
Reaction score
4,583
Location
Cave junction Oregon
First Name
Greg bush
Truck Year
1991 SB
Truck Model
K30
Engine Size
5.9 Cummins 12 valve
Do you have a test light or multimeter? I would test for power at plug terminals and if nothing then probe wires first before replacing socket. I had to replace one of my sockets this spring because the pot metal conductor gave. Sometimes it's just needing a good scrape to clean.
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,935
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Tail and brake are different circuits, brake and directional are the same circuit. Signal switch and flasher open and close brake circuit for flash. If that's what you're asking.
 

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,042
Reaction score
6,634
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
Tail and brake are different circuits, brake and directional are the same circuit. Signal switch and flasher open and close brake circuit for flash. If that's what you're asking.
I guess what I was asking was that given that I can make the bulb flash if I hold it in place was it safe to assume it was just a socket issue.

@squaredeal91 - I do - at the house.

LOL
 

fast 99

Full Access Member
Joined
Dec 31, 2021
Posts
2,029
Reaction score
2,935
Location
Spokane, Washington
First Name
Brian
Truck Year
81,85
Truck Model
K20
Engine Size
350
Yes, if not too bad the socket can be cleaned. There are new sockets available.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,192
Reaction score
8,030
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I hate those damn OEM sockets! When I went thru my electrical system I changed every single plug in the harness to weather pack terminals. During that process I also Shtcanned the 1156/1157 sockets and replaced them with modern 3056/57 spade type sockets. No more electrical gremlins for this Chicken Farmer!
 

Attachments

  • 3057.PNG
    3057.PNG
    392.8 KB · Views: 51

Goldie Driver

Full Access Member
Joined
Mar 19, 2018
Posts
4,042
Reaction score
6,634
Location
Houston, Texas
First Name
Britt
Truck Year
1980
Truck Model
GMC K1500 Suburban
Engine Size
350
OK - how about a solution. Bad (new) bulb. Bought some at O Reallys on the way home as a sudden I wonder ! flash of inspiration.

Of course, it could have been the heat - I had the window down.

But, the new bulb fixed it. :)
 

Attachments

  • 20230824_183653.jpg
    20230824_183653.jpg
    115.1 KB · Views: 66

Latest posts

Forum statistics

Threads
44,163
Posts
950,656
Members
36,276
Latest member
2manysquares2care
Top