Best headlights to use, NOT LED

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dutch Rutter

Full Access Member
Joined
Aug 13, 2013
Posts
1,081
Reaction score
1,232
Location
Independence, Or
First Name
Joshua
Truck Year
1984
Truck Model
K20
Engine Size
5.7
I'm also running LMC's set, with Sylvania Silverstars and LMC's relay kit. Fit is decent, they work great! Well worth the money imho.

You must be registered for see images attach


You must be registered for see images attach


You must be registered for see images attach
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,106
Reaction score
3,141
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
I bought the LMC relay wiring kit.

Bulbs are the Hella H4s, but with 55W low beam and 100W high beam. I work nights, so use headlights a lot. The high beam relays did go out after a few years. So I bought a handful of replacement relays to keep around.

I'm a roundeye though.

You must be registered for see images attach
 

vintovka

Member
Joined
Feb 16, 2017
Posts
47
Reaction score
47
Location
or
First Name
vin
Truck Year
84
Truck Model
k10
Engine Size
350
I know OP wanted only non LEDS but been down that road. I was looking hard for hi output non Leds for the new 54 body, None gave the light i needed for may aging eyes And $$ was almost outrageous. After trying several Leds and non LEDS i settled for nice halogens and was very disappointed. Added the cheapy add on leds for fun. For a try i went out on a moonless light and turned off the halogens and flipped on just the LEDs. Difference was shocking. Wired them up so LEDs only come one with brights and works amazingly/shockingly well. LEDs for stock can be super expensive and these were so cheap its embarrassing. If you can stand add on Leds try it and save your bucks. BTW the halogen flood are also very underwhelming..

You must be registered for see images attach
 

Doppleganger

Full Access Member
Joined
May 24, 2019
Posts
12,793
Reaction score
59,330
Location
OH-MI: Just like it sounds
First Name
Chris
Truck Year
1985
Truck Model
K20
Engine Size
5.7
I know OP wanted only non LEDS but been down that road. I was looking hard for hi output non Leds for the new 54 body, None gave the light i needed for may aging eyes And $$ was almost outrageous. After trying several Leds and non LEDS i settled for nice halogens and was very disappointed. Added the cheapy add on leds for fun. For a try i went out on a moonless light and turned off the halogens and flipped on just the LEDs. Difference was shocking. Wired them up so LEDs only come one with brights and works amazingly/shockingly well. LEDs for stock can be super expensive and these were so cheap its embarrassing. If you can stand add on Leds try it and save your bucks. BTW the halogen flood are also very underwhelming..

You must be registered for see images attach

Need more pics of this truck.
 

SquareRoot

Full Access Member
Joined
Mar 18, 2017
Posts
4,229
Reaction score
8,117
Location
Arizona
First Name
Mike
Truck Year
85
Truck Model
K20
Engine Size
350
I've got Hellas but they discontinued the low beams. Only seller I could find (and I bet I contacted 10+) that had it is in Oregon and sells on Amazon. That was it. If you see them on any site, contact them first and ask if they have them IN STOCK. If not, you'll waste weeks while they look for them.

Plan B is there are other brands that pop up on ebay that are serviceable. Cibies were by far the best ever made - and once in awhile you can buy their OEM offspring under the Valeo label.

If you do bag the Hellas, do yourself a favor and get some Xpel sheeting for them...saves them from sandblasting or the errant rock.
I know OP wanted only non LEDS but been down that road. I was looking hard for hi output non Leds for the new 54 body, None gave the light i needed for may aging eyes And $$ was almost outrageous. After trying several Leds and non LEDS i settled for nice halogens and was very disappointed. Added the cheapy add on leds for fun. For a try i went out on a moonless light and turned off the halogens and flipped on just the LEDs. Difference was shocking. Wired them up so LEDs only come one with brights and works amazingly/shockingly well. LEDs for stock can be super expensive and these were so cheap its embarrassing. If you can stand add on Leds try it and save your bucks. BTW the halogen flood are also very underwhelming..

You must be registered for see images attach

There's got to be a law in California banning high capacity headlights?
 

Itali83

Full Access Member
Joined
Feb 7, 2015
Posts
575
Reaction score
1,079
Location
Maine
First Name
Ben
Truck Year
1982, 1987, 1987
Truck Model
K10, 'burban C10, Jimmy
Engine Size
350, 6.2, 350
Thanks for the ideas guys. I just can’t stand the look of the led spot/flood lights on an older vehicle. I do have a set of super cheap yellow fog lights that take the H3 bulbs and they work well. Just switched them to led bulbs because the light still looks the same visually, but am unimpressed with their performance. I already have good relay power to my bumper for those lights. I may look for a good set of those instead and just replace my old and faded sealed beams and call it a day.

Ben
 

Catbox

Full Access Member
Joined
Jul 12, 2018
Posts
4,471
Reaction score
16,783
Location
Just Outside of Portland Oregon
First Name
Peter
Truck Year
1979
Truck Model
C20 Silverado Camper Special
Engine Size
461
Mine has circle lights, so I will not be much help to the OP.
But, I had found a set of stock Jeep Wrangler headlights at the thrift store for $16 for the pair.
I just had to order a adapter to go from the stock light plug to the Jeep plug for another $8.
@Maxwellvis installed them when he needed a new light and they are much better than just putting in a new sealed beam.
Now it has H4 bulbs that we can replace with fancy ones if we wish too.
Plus they don't look out of place like some of the LED ones do.

You must be registered for see images attach
 

PrairieDrifter

Full Access Member
Joined
Dec 28, 2014
Posts
3,875
Reaction score
5,703
Location
North Dakota
First Name
Mason
Truck Year
84,79,77,76,70,48
Truck Model
Suburban k10, bonanza k10, k30, k20, c10, gmc 1/2ton
Engine Size
350, 350, 350, 350, 350, 350
It's worth it to do the relay kit as well. You won't melt your headlight switches anymore and I feel like you get more brightness.
 

Bextreme04

Full Access Member
Joined
May 13, 2019
Posts
4,463
Reaction score
5,626
Location
Oregon
First Name
Eric
Truck Year
1980
Truck Model
K25
Engine Size
350-4bbl
It's worth it to do the relay kit as well. You won't melt your headlight switches anymore and I feel like you get more brightness.

I agree with this. I replaced mine with sylvania silverstars and they were not much better than stock and I was getting my vehicle voltage dropping when then headlights were on. I just put on a relay kit and they are WAY brighter and my voltage isn't dropping anymore.
 

RLC2020

Junior Member
Joined
Oct 13, 2020
Posts
16
Reaction score
18
Location
Malabar FL
First Name
Ross
Truck Year
1983
Truck Model
Suburban C20
Engine Size
6.2L Diesel
Does anyone have the part numbers for the sylvania lights? Uppers and lowers for the xtra vision ones if those are the best. TYIA, I want to make sure I'm ordering the right ones. Whatever the best relatively inexpensive option is that I can pickup in store this weekend. I'm on my first week of commuting with my new suburban and the stock lights are damn near useless. I did order the relay kit from the link posted above already.
 

Latest posts

Forum statistics

Threads
44,391
Posts
956,333
Members
36,683
Latest member
aim410x
Top