Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
another mysterious, 30 year old truck noise thread LOL
- Thread starter Vbb199
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
After returning from the alignment shop, naturally, that didnt fix the issue.
I did however test things out while cruising.... in drive rolling down the road, if i threw it in neutral, the whine stopped.. so its trans related... then some things occured to me.
It was a brand new rebuild, ive put less than 5k miles on it since i slid it in, and i havent changed the fluid....
Then thinking on it, as i said, fluid is red, not dirty, but has clutch contaminates in it.
Im now about 99% sure it is a pump whine, i need to dump that fluid, and change my filter thats all packed up.
I did however test things out while cruising.... in drive rolling down the road, if i threw it in neutral, the whine stopped.. so its trans related... then some things occured to me.
It was a brand new rebuild, ive put less than 5k miles on it since i slid it in, and i havent changed the fluid....
Then thinking on it, as i said, fluid is red, not dirty, but has clutch contaminates in it.
Im now about 99% sure it is a pump whine, i need to dump that fluid, and change my filter thats all packed up.
80BrownK10
Full Access Member
- Joined
- Oct 22, 2019
- Posts
- 1,878
- Reaction score
- 1,247
- Location
- Greenwood, SC
- First Name
- Nate
- Truck Year
- 1980
- Truck Model
- K10
- Engine Size
- 350
Hope this soves the problem!!
Memaloose
Full Access Member
- Joined
- Dec 2, 2018
- Posts
- 544
- Reaction score
- 1,595
- Location
- Dolan Springs, AZ
- First Name
- Tony
- Truck Year
- 1975
- Truck Model
- K20
- Engine Size
- 350
Glad you found the problem! I hope it's not an expensive fix.
Charlie
Mopar by Birth. Chevy by Choice.
- Joined
- Aug 2, 2017
- Posts
- 1,837
- Reaction score
- 912
- Location
- Euless, Texas
- First Name
- Don
- Truck Year
- 1974
- Truck Model
- Cheyenne 10 LWB
- Engine Size
- 350/TH350/AC/4 BBL Quadrajet
I had a whining sound when in D or R, not in N or P. Was told it was transmission pump. After rebuild, haven't heard it since. I have a wall next to the truck where I park and sound reflected more off the wall.
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
Im pretty sure its a planetary.
Sound didnt go away with filter and fluid change
Sound didnt go away with filter and fluid change
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
I will be pulling the trans tomorrow. DAMNIT.
The whining got worse today after driving for maybe a constant 45 min.
Thankfully i have a couple spare 4l60e/700r4 planetaries to choose from.
Irony of this ****** situation is, i completely shattered my planetary and forward sprauge in my s10'a 4L60e. Lol
The whining got worse today after driving for maybe a constant 45 min.
Thankfully i have a couple spare 4l60e/700r4 planetaries to choose from.
Irony of this ****** situation is, i completely shattered my planetary and forward sprauge in my s10'a 4L60e. Lol
Last edited:
- Joined
- Aug 3, 2010
- Posts
- 30,438
- Reaction score
- 28,337
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
You don't think it could be the pump?
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
@bucket
I spoke with a guy down the road that used to build transmissions for a living, and now just does it for the local hotrod boys on all types of builds for LS, nitrous, n/a, etc (im learning under him when i encounter a crossroad on my own), he seems pretty convinced its a thrashed planetary also given the details i relayed.
I will be inspecting the pump while im at it for contaminates, i noticed some brass shavings within the pan, which is planetary thrust washers apparently... so its not looking good
Thankfully, addressing this NOW will be alot better for the overall health of the trans vs waiting till it explodes and it needs a total overhaul.
It still shifts hard, runs fine, etc etc.
I spoke with a guy down the road that used to build transmissions for a living, and now just does it for the local hotrod boys on all types of builds for LS, nitrous, n/a, etc (im learning under him when i encounter a crossroad on my own), he seems pretty convinced its a thrashed planetary also given the details i relayed.
I will be inspecting the pump while im at it for contaminates, i noticed some brass shavings within the pan, which is planetary thrust washers apparently... so its not looking good
Thankfully, addressing this NOW will be alot better for the overall health of the trans vs waiting till it explodes and it needs a total overhaul.
It still shifts hard, runs fine, etc etc.
80BrownK10
Full Access Member
- Joined
- Oct 22, 2019
- Posts
- 1,878
- Reaction score
- 1,247
- Location
- Greenwood, SC
- First Name
- Nate
- Truck Year
- 1980
- Truck Model
- K10
- Engine Size
- 350
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
Extend your stay in NC and come help me pull a 700r4
I can get it in 2 hrs flat alone.
80BrownK10
Full Access Member
- Joined
- Oct 22, 2019
- Posts
- 1,878
- Reaction score
- 1,247
- Location
- Greenwood, SC
- First Name
- Nate
- Truck Year
- 1980
- Truck Model
- K10
- Engine Size
- 350
Who rebuilt this trans you or a shop?
Vbb199
B-rate Hillbilly Customs
- Joined
- Jan 12, 2018
- Posts
- 9,039
- Reaction score
- 15,332
- Location
- Salisbury NC
- First Name
- Vince
- Truck Year
- 89, 79
- Truck Model
- 89 Suburban R1500, 79 C10
- Engine Size
- 350, 502
A shop, but.... the backstory to this 700 is, when my original 700 died, i was looking at 800 for a overhaul, or like, 1200 for a 600hp 700r4.
It was picked up cheaper than what he paid because finding someone to buy a transmission thats "good" is hard (trust me, ive tried, ALL transmissions are typically just a core, no matter claims what, i mean face it, from the outside, nobody knows what is goijg on inside there)
My dad contacted the local hotrod network of guys that are near us (me and dad know them), one of the gents had him a fresh 700r4 for his 68 chevelle to go behind his 468, but he decided to LS swap it (gross i know), so we was able to get the 700r4 for dirt cheap...
The sad part here, i dont blame the builder or whatever, the particular planetary apparently is known for being bad and wearing out in 700's and 4L60e's.
So a bit if a crap shoot on that one...
I hate it, but it is what it is.
I'm not gonna say "all 700r4s are trouble"
Im gonna say i punished the transmission daily on less than 600hp, and ran into a bad stroke of luck.
Is what it is.
I love doing this **** anyways.
Kinda lousy, i was gonna pull my intake tomorrow and reseal it because i believe i have a leak..... oh well! Next weekend, right?
- Joined
- Aug 3, 2010
- Posts
- 30,438
- Reaction score
- 28,337
- Location
- Usually not in Ohio
- First Name
- Andy
- Truck Year
- '77, '78, '79, '84, '88
- Truck Model
- K5 thru K30
- Engine Size
- 350-454
A shop, but.... the backstory to this 700 is, when my original 700 died, i was looking at 800 for a overhaul, or like, 1200 for a 600hp 700r4.
It was picked up cheaper than what he paid because finding someone to buy a transmission thats "good" is hard (trust me, ive tried, ALL transmissions are typically just a core, no matter claims what, i mean face it, from the outside, nobody knows what is goijg on inside there)
My dad contacted the local hotrod network of guys that are near us (me and dad know them), one of the gents had him a fresh 700r4 for his 68 chevelle to go behind his 468, but he decided to LS swap it (gross i know), so we was able to get the 700r4 for dirt cheap...
The sad part here, i dont blame the builder or whatever, the particular planetary apparently is known for being bad and wearing out in 700's and 4L60e's.
So a bit if a crap shoot on that one...
I hate it, but it is what it is.
I'm not gonna say "all 700r4s are trouble"
Im gonna say i punished the transmission daily on less than 600hp, and ran into a bad stroke of luck.
Is what it is.
I love doing this **** anyways.
Kinda lousy, i was gonna pull my intake tomorrow and reseal it because i believe i have a leak..... oh well! Next weekend, right?
All I heard from this story was "so there was this guy selling a cheap 468 and a 700r4 so I just bought the 700r4"
