whiskeydents
Full Access Member
- Joined
- Nov 23, 2022
- Posts
- 62
- Reaction score
- 264
- Location
- AZ
- First Name
- morgan
- Truck Year
- 1976
- Truck Model
- K25
- Engine Size
- 400
Hello,
My name is Morgan, and I am the owner of this 1976 GMC K25 4x4.
It was purchased new here in Arizona by my great Aunt and Uncle. It sat for quite a while for the past 20 or so years. It has the 400 small block and is the Sierra Classic trim package. I recently swapped the TH350/203 for a SM465/205. The motor was rebuilt last fall and I decided to keep it mostly stock being that it will be used to haul wood and screw around in the woods. Plans are to get a new bedside on the passenger side and fix some
rust in the passenger door and get it painted. Hood has the “kink” and a little bit of rust so may need to replace that eventually.
Most pictures of it will be from driver side as the passenger side has its fair share of dents. Haha
Thank you folks in advance for the help.
My name is Morgan, and I am the owner of this 1976 GMC K25 4x4.
You must be registered for see images attach
It was purchased new here in Arizona by my great Aunt and Uncle. It sat for quite a while for the past 20 or so years. It has the 400 small block and is the Sierra Classic trim package. I recently swapped the TH350/203 for a SM465/205. The motor was rebuilt last fall and I decided to keep it mostly stock being that it will be used to haul wood and screw around in the woods. Plans are to get a new bedside on the passenger side and fix some
rust in the passenger door and get it painted. Hood has the “kink” and a little bit of rust so may need to replace that eventually.
You must be registered for see images attach
Most pictures of it will be from driver side as the passenger side has its fair share of dents. Haha
Thank you folks in advance for the help.