Cyn88
Junior Member
- Joined
- Jan 10, 2013
- Posts
- 6
- Reaction score
- 2
- Location
- California
- First Name
- Cynthia
- Truck Year
- 86
- Truck Model
- c10
- Engine Size
- 305
New Motors
New Switches
Fuses Good
When I bypass the system and supply power for the motors directly from the battery they work just fine but when I try to use the switch, nothing! I know it could be an electric/wiring problem but I just wanted to check here first to see if I maybe I'm not overlooking something simpler/cheaper.
*Please note : This started when the driver side window was lowered all the way down. They have both been stuck ever since.
I've always had a problem with my driver side window getting stuck when placed either all the way down or all the way up, however I was always able to get it going again by removing the door panel and giving the motor a few hits with a broom stick.
Any/All help would be much appreciated
thank you!
New Switches
Fuses Good
When I bypass the system and supply power for the motors directly from the battery they work just fine but when I try to use the switch, nothing! I know it could be an electric/wiring problem but I just wanted to check here first to see if I maybe I'm not overlooking something simpler/cheaper.
*Please note : This started when the driver side window was lowered all the way down. They have both been stuck ever since.
I've always had a problem with my driver side window getting stuck when placed either all the way down or all the way up, however I was always able to get it going again by removing the door panel and giving the motor a few hits with a broom stick.
Any/All help would be much appreciated
thank you!
