shep151
Junior Member
- Joined
- Oct 6, 2023
- Posts
- 21
- Reaction score
- 51
- Location
- Columbia River Gorge
- First Name
- Zach
- Truck Year
- 1978
- Truck Model
- k10
- Engine Size
- 350
So I did a thing...
Found a super cheap set of 4Runner seats (my personal favorite) and went to work.
I built a platform to span the original bench seat brackets, cut the mounting brackets off the 4Runner sliders and mounted them up.
For the center seat, I had most of a sheet of 3/4 furniture grade plywood, so I built a down-firing subwoofer box into it. 2" of HD foam on top, all covered with heavy duty Naugahyde and carpet I had left over from another project.
The armrest/storage console was a bit of a challenge, but I'm pretty happy with how it turned out.
Oh, and I added KilMat to the areas this project exposed. That made a huge difference!
Found a super cheap set of 4Runner seats (my personal favorite) and went to work.
I built a platform to span the original bench seat brackets, cut the mounting brackets off the 4Runner sliders and mounted them up.
For the center seat, I had most of a sheet of 3/4 furniture grade plywood, so I built a down-firing subwoofer box into it. 2" of HD foam on top, all covered with heavy duty Naugahyde and carpet I had left over from another project.
The armrest/storage console was a bit of a challenge, but I'm pretty happy with how it turned out.
Oh, and I added KilMat to the areas this project exposed. That made a huge difference!
