350 Distributor Recommendations

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

4WDKC

Full Access Member
Joined
Jan 27, 2016
Posts
2,366
Reaction score
1,090
Location
Southern Florida
First Name
Kacy
Truck Year
1987
Truck Model
V10
Engine Size
350
I put in a new Spectra dist in my truck when the old one died and have the same dist. in my vette no issues,just not cheap, looks like I need to shop around more before buying.
 

WHEELMAN

Full Access Member
Joined
Aug 9, 2011
Posts
136
Reaction score
11
Location
HICKORY TAVERN SC
First Name
BILL
Truck Year
1986
Truck Model
C10
Engine Size
454 v8
Go to jegs and buy the best new one that you can afford.
 

Rusty Nail

Full Access Member
Joined
Jan 29, 2015
Posts
10,041
Reaction score
10,134
Location
the other side of the internet
First Name
Rusty
Truck Year
1977
Truck Model
C20
Engine Size
350sbc
Wait, what?

Dude. I'm not screwin around - there is no sarcasm. Them are fine auto parts and I have purchased three of those distributors..I have more than one ride..

I'm glad you found what you need.
 

Ronno6

Full Access Member
Joined
May 14, 2018
Posts
438
Reaction score
126
Location
South Mississippi
First Name
Ron
Truck Year
1984
Truck Model
C10
Engine Size
355
Speedmaster is a company name

I own a JEGS Street Spark distributor that is in my hot rod.

I own a Skip White unit that has become very popular with users within this MSB.
Matter of fact I have purchased THREE of them. Because they suck, they're ugly, and a crappy deal. AND Skip White customer service blows chunks...so I keep giving them money.

But hey, dowutchlike.

This was not sarcasm??
I REALLY feel like Sheldon Cooper now.......
 

MikeB

Full Access Member
Joined
Apr 4, 2014
Posts
1,775
Reaction score
1,004
Location
North Texas
First Name
Mike
Truck Year
1969
Truck Model
C10
Engine Size
355
I wouldn't even consider one of the no-name or store brand HEIs. Or especially the over-hyped SW stuff. I mean, why on earth would you buy something dirt cheap, and then have to buy spare parts knowing it's going to fail?:eek: Replacing internal distributor parts, especially away from home, is a lot more difficult than replacing a broken H-F tool with a spare.

Over the past 40 years, I have NEVER had a problem with GM, AC Delco, or MSD distributors. I put 100K + miles on several 70s-80s GM cars and trucks, and all I ever did was change HEI caps and rotors as preventive maintenance. My son's 69 pickup has had the same GM HEI with MSD internals since around 2002. In fact, I should probably change the cap and rotor! When it comes to electronics, made in Mexico or Taiwan is light years better than made in China by a low-bidder factory with no QA department.

On another note, a 3.73 axle, 1:1 4th gear, and 29" tires will make for a very busy engine at any speed above 60 mph. Been there done that with 3.42 gears and 27" tires (which works out to be nearly the same). But if you've been driving the truck with that gearing, you already know this.:)
 

Ronno6

Full Access Member
Joined
May 14, 2018
Posts
438
Reaction score
126
Location
South Mississippi
First Name
Ron
Truck Year
1984
Truck Model
C10
Engine Size
355
On another note, a 3.73 axle, 1:1 4th gear, and 29" tires will make for a very busy engine at any speed above 60 mph. Been there done that with 3.42 gears and 27" tires (which works out to be nearly the same). But if you've been driving the truck with that gearing, you already know this.:)

I had a 79 Z28 that was set up like that.
It turned 'bout 1K rpms per 20mph.
#K @ 60mph had her whining pretty good.
Might have had smaller tires, can't remember.
Online calculators indicate I should do 75mph@3K rpms.
Ultimate goal is to have a T56 or maybe a stout 5 speed OD tranny...........
I'n mot gonna do much highway driving nohow...........
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,445
Reaction score
28,347
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I had a 79 Z28 that was set up like that.
It turned 'bout 1K rpms per 20mph.
#K @ 60mph had her whining pretty good.
Might have had smaller tires, can't remember.
Online calculators indicate I should do 75mph@3K rpms.
Ultimate goal is to have a T56 or maybe a stout 5 speed OD tranny...........
I'n mot gonna do much highway driving nohow...........


It's very off-topic, but do you have any pictures of that Z?
 

Ronno6

Full Access Member
Joined
May 14, 2018
Posts
438
Reaction score
126
Location
South Mississippi
First Name
Ron
Truck Year
1984
Truck Model
C10
Engine Size
355
It's very off-topic, but do you have any pictures of that Z?
I would really have to do some digging.....
It was T'toppped and I had it painted teal.......with 16" IROC wheels
Vette Brakes carbon fiber suspension F&R....like riding on a brick, but corner lean was zero !
 

Ronno6

Full Access Member
Joined
May 14, 2018
Posts
438
Reaction score
126
Location
South Mississippi
First Name
Ron
Truck Year
1984
Truck Model
C10
Engine Size
355
Among other odd character quirks, Sheldon cold not recognize sarcasm.
It is a recurring theme throughout the show's run....
Should you ever decide to sample the show, view episodes from the earlier years...
Its humor steadily declined in the past few now in its 12th season..........
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,445
Reaction score
28,347
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
That's impressive.......if'n I didn't, I'd a had more kids............

How many kids? We own a TV and still have 8 kids, lol.
 

Blue Ox

Turning Diesel Fuel Into Fun
Joined
Mar 27, 2018
Posts
5,219
Reaction score
12,015
Location
LI-NY
First Name
Derek
Truck Year
MCMLXXXV
Truck Model
K20HD
Engine Size
6.2L
If you do it doggy style neither of you has to miss your favorite show.
 

Latest posts

Forum statistics

Threads
44,167
Posts
950,740
Members
36,282
Latest member
Doug Hampton
Top