3 speed saginaw replacement with 5 speed

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,735
Reaction score
3,908
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
Mine was either an HM290 or 5LM60, which are nearly identical from the outside as the NV3500 but NV3500’s are better internally.

What year s-10 is it? Could be any of the 3 above, BW T5, or world class BW T5
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,620
Reaction score
28,867
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Mine was either an HM290 or 5LM60, which are nearly identical from the outside as the NV3500 but NV3500’s are better internally.

What year s-10 is it? Could be any of the 3 above, BW T5, or world class BW T5

I wasn't aware of the S10 being available with a T5 behind a 4.3? From what I remember, all 4.3 rigs were auto only until 90 or '91 when they started using the HM290/5LM60 or whatever they were calling it first.

I had one in a '91. Many times I've heard people say that they weren't a good transmission, but I couldn't break mine. I abused the crap out of it. Lots and lots of clutch dumps and an obscene amount of no lift shifts too. That truck was a hoot.
 

CalSgt

Full Access Member
Joined
Oct 3, 2021
Posts
1,735
Reaction score
3,908
Location
CA
First Name
Casey
Truck Year
1980
Truck Model
Chevy K-10 Custom Deluxe
Engine Size
350
I wasn't aware of the S10 being available with a T5 behind a 4.3? From what I remember, all 4.3 rigs were auto only until 90 or '91 when they started using the HM290/5LM60 or whatever they were calling it first.

I had one in a '91. Many times I've heard people say that they weren't a good transmission, but I couldn't break mine. I abused the crap out of it. Lots and lots of clutch dumps and an obscene amount of no lift shifts too. That truck was a hoot.
I read it on the internet so it must be true… Right?

The list in the link is pretty general and doesn’t include engine size on some of the listings.

https://www.drivetrain.com/parts-ca...entify-chevrolet-gmc-manual-transmissions-v24
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,620
Reaction score
28,867
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
I read it on the internet so it must be true… Right?

The list in the link is pretty general and doesn’t include engine size on some of the listings.

https://www.drivetrain.com/parts-ca...entify-chevrolet-gmc-manual-transmissions-v24

Yeah, I believe all that info is good, it just doesn't state which was used behind what.

As I think about it, more memories are coming back. From what I remembered, the 5 speed (HM290 I guess... I've never found out for sure) wasn't available behind the 4.3 until the '91 model year. That article says '90. However, it made me remember that my '91 was made in what would have been crazy early in the production year. It was like June of '90 I think. Or May. I can't remember, I just recall that it was very early.
 

Forum statistics

Threads
44,414
Posts
957,098
Members
36,750
Latest member
jdishman2355
Top