Taylorb27
Full Access Member
- Joined
- May 4, 2020
- Posts
- 78
- Reaction score
- 35
- Location
- North Dakota
- First Name
- Taylor
- Truck Year
- 1984
- Truck Model
- C10
- Engine Size
- 305
Yes I know I know I should have googled first...
looking at ways around this, I know I could run a spacer but the front fitment is just how I want it. Will be lowering soon. First question, would cut coils drop the UCA inside the wheel? Will be cutting at least a coil, possibly 2 and doing an axle flip in the back. This is just a town cruiser so I’m not concerned much with ride quality, I’ll leave to my other projects.
I’m sure a drop spindle would do it too
Any feed back is sure appreciated
looking at ways around this, I know I could run a spacer but the front fitment is just how I want it. Will be lowering soon. First question, would cut coils drop the UCA inside the wheel? Will be cutting at least a coil, possibly 2 and doing an axle flip in the back. This is just a town cruiser so I’m not concerned much with ride quality, I’ll leave to my other projects.
I’m sure a drop spindle would do it too
Any feed back is sure appreciated
You must be registered for see images attach
