15" vs 17" wheels

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
Hello,

Has anyone changed from 15" wheels to 17" and noticed a difference in ride?
Is the ride better or worse, more stable, etc?
Will be for my 4x4 K5 with 33x12.5 tires.

Thanks.
 

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,595
Reaction score
28,800
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Depends on the tires you get. Many 17's in the 33" range are going be a load range E, which makes for a more firm and stable ride, besides the shorter sidewall.
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,107
Reaction score
3,144
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
If you air down the tires for more traction off road then 15" wheels will be a bit nicer. Gives you more sidewall to flex and a bigger footprint.
 

TubeTruck

I'm from Boston. Deal with it.
Joined
Sep 4, 2019
Posts
1,439
Reaction score
2,180
Location
East TN
First Name
Denis
Truck Year
1978
Truck Model
Suburban K10
Engine Size
LQ9
I'm running 285/70/R17 Cooper AT3 XLT's. Yes, load range E1. Super nice ride but it's most likely the tire. A lot of wheelers are running 17's these days. 17's are the new 15's and 37's are the new 35's lol
 

77 K20

Full Access Member
Joined
Nov 9, 2012
Posts
3,107
Reaction score
3,144
Location
Montana
First Name
Mike
Truck Year
1977
Truck Model
K20 5" lift
Engine Size
HT383 fuel injected
I moved up to 17" from 16" as there aren't a whole lot of choices in 16 anymore. And zero beadlock wheels in that size unless it custom made.

Might check out prices first though. 15" are cheaper for the most part. At least in General and BFG the 15" were around $50/tire cheaper.

And at least at Discount tire they have 22 results for 15" tires and only 10 tires for 17".
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
I moved up to 17" from 16" as there aren't a whole lot of choices in 16 anymore. And zero beadlock wheels in that size unless it custom made.

Might check out prices first though. 15" are cheaper for the most part. At least in General and BFG the 15" were around $50/tire cheaper.

And at least at Discount tire they have 22 results for 15" tires and only 10 tires for 17".

Right, this is what I've been trying to decide. Is it worth the $$ to move to 17"?
I'd have to buy wheels and more expensive tires.
The 15" BFG KO2's are $193 at discount tire with the 17" at $287 each.
KM3's are $262 vs $315

In either case I have to buy tires, mine are shot.
 

Grit dog

Full Access Member
Joined
May 18, 2020
Posts
7,077
Reaction score
12,446
Location
Auburn, Washington
First Name
Todd
Truck Year
1986, 1977
Truck Model
K20, C10
Engine Size
454, 350
33s on 17s is still a lot of sidewall. No issues with it being too stiff, however at the same pressure as 15s it will be less mushy and handle better.
Depends what you want out of the truck. More handling or more sidewall/off road. But in reality the difference will be subtle.
move never understood how folks think higher load ratings ride rougher. Yes the tires themselves are thicker sidewall/ stiffer, however air pressure determines the ride. And a couple psi lower on a stiffer tire is the same as couple psi higher on a softer tire. (Approximately)

^Not directed at your comment bucket. What you said I agree with but commonly folks think E tire ride rougher than say C.
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
33s on 17s is still a lot of sidewall. No issues with it being too stiff, however at the same pressure as 15s it will be less mushy and handle better.
Depends what you want out of the truck. More handling or more sidewall/off road. But in reality the difference will be subtle.
move never understood how folks think higher load ratings ride rougher. Yes the tires themselves are thicker sidewall/ stiffer, however air pressure determines the ride. And a couple psi lower on a stiffer tire is the same as couple psi higher on a softer tire. (Approximately)

Good points. I know there are more plys in the 17's than 15s, at least in the tires I'm considering.
Not worried about a stiff ride, not a caddy. I actually prefer that. With the current setup 33x12.5R15 it just feels a little spongy. Could also be that the tires are worn out, IDK.
 

Dutch Rutter

Full Access Member
Joined
Aug 13, 2013
Posts
1,081
Reaction score
1,232
Location
Independence, Or
First Name
Joshua
Truck Year
1984
Truck Model
K20
Engine Size
5.7
I'm going the other way. Finally going to do away with the aftermarket 16.5s. I'm moving to 16"s (original size on the truck) and I'm planning on a 285/75r16 wildpeak atw3 load range E.

I'm looking forward to the higher load capacity and better ride then my small 14 year old toyo ATs.
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
I'm going the other way. Finally going to do away with the aftermarket 16.5s. I'm moving to 16"s (original size on the truck) and I'm planning on a 285/75r16 wildpeak atw3 load range E.

I'm looking forward to the higher load capacity and better ride then my small 14 year old toyo ATs.
I had an 86 k20 with 16.5's and 33x12.5 BFG KO's years ago. I liked the look and the ride.
I'm with you, I think the tires are my main problem.
 

F-64

Full Access Member
Joined
Jan 11, 2020
Posts
118
Reaction score
102
Location
nyc
First Name
mike
Truck Year
1987
Truck Model
R10 lwb
Engine Size
5.7 tbi stock
If appearance is a big factor to you then that may pull you toward the 17's.
It's all about compromises.
Your rotating mass and unsprung weight may go up quite a bit with the 17's.
With the higher weight your shocks will have to work harder to keep the tire on the road.
Your acceleration and braking may not be as good with the 17's, but that may also depend on the tires you choose. You may be able to find a better quality tire in the 17" size.


I've stayed with 15's and run a light weight rim. My problem is the tire selection in the 15" diameter is getting worse or more expensive.
You'll have to do the math with the weight change.
 

RoryH19

Full Access Member
Joined
Aug 21, 2015
Posts
1,668
Reaction score
1,082
Location
Texas
First Name
Rory
Truck Year
1987
Truck Model
R10 Silverado SWB
Engine Size
350 TBI
If appearance is a big factor to you then that may pull you toward the 17's.
It's all about compromises.
Your rotating mass and unsprung weight may go up quite a bit with the 17's.
With the higher weight your shocks will have to work harder to keep the tire on the road.
Your acceleration and braking may not be as good with the 17's, but that may also depend on the tires you choose. You may be able to find a better quality tire in the 17" size.


I've stayed with 15's and run a light weight rim. My problem is the tire selection in the 15" diameter is getting worse or more expensive.
You'll have to do the math with the weight change.

I was thinking the weight would be approximately the same if I went from 15" steel wagons to 17" aluminum.
BFG makes both the tires I like in 15 and 17, no issue there. Not sure if in the future that will change. I know many are having this problem with 16/16.5 wheels.
 

F-64

Full Access Member
Joined
Jan 11, 2020
Posts
118
Reaction score
102
Location
nyc
First Name
mike
Truck Year
1987
Truck Model
R10 lwb
Engine Size
5.7 tbi stock
It's not so much the total weight. It's where the weight is placed on the circle.
A 17" wheel will have more weight further from the center of the hub than a 15" all other factors being the same.

Your 17" aluminum rim may make the differences less of an issue.
 

Scott91370

Full Access Member
Joined
Apr 2, 2018
Posts
1,009
Reaction score
1,043
Location
Burleson, Tx
First Name
Scott
Truck Year
1985
Truck Model
Sierra1500
Engine Size
350
With that tire they will be E rated and that much sidewall there won't be much, if any, difference.
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,094
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
Just for what it's worth, the weight difference between my 16" wheels and tires vs my 17" wheels and tires (03 VW Jet TDI) is substantial. I didn't put them on a scale yet, that will happen in the spring but I'm guessing an easy 10 lbs per wheel/tire unit. I'll be adding a min 40 lbs to my car to use the 17s..? Kinda sucks.. These are both factory VW rims btw.
 

Latest posts

Forum statistics

Threads
44,401
Posts
956,714
Members
36,711
Latest member
MTsquare
Top