10 Bolt Rear Axle Oil Change w/ Factory Limited Slip

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

bucket

Super Moderator
Staff member
Super Moderator
Joined
Aug 3, 2010
Posts
30,446
Reaction score
28,352
Location
Usually not in Ohio
First Name
Andy
Truck Year
'77, '78, '79, '84, '88
Truck Model
K5 thru K30
Engine Size
350-454
Make sure you take off the fill plug first, Just to make sure it isnt seized, other wise you wont be able to put the fluid back in!!!

You can still get fluid back in.

Just get a couple ziplock bags, in the quart size. Fill each bag with lube, then stuff them into the diff housing. Drive the truck. After a few feet, the lube is out of the bags... after a mile or so, the ziplock bags are now "posi additive". Seriously though, the mutilated bags won't hurt a thing.
 

mike

Junior Member
Joined
Jan 15, 2012
Posts
20
Reaction score
1
Location
Arizona
First Name
Mike
Truck Year
1987
Truck Model
k10
Engine Size
350
Numbers on back differential

Can any body tell me what these numbers mean. They are from my 1987 Chevy 1/2 ton 4x4, 350, 5.7 tbi. The numbers are off my rear differential:
GM1, H126, 14055251. These are the only numbers found on it! Thanks for the help.
 

HotRodPC

Administrator
Staff member
Admin
Joined
Aug 29, 2010
Posts
47,128
Reaction score
9,299
Location
OKC, OK
First Name
HotRod
Truck Year
85 K20 LWB
Truck Model
Silverado
Engine Size
454 - Turbo 400 - 3.73
Can any body tell me what these numbers mean. They are from my 1987 Chevy 1/2 ton 4x4, 350, 5.7 tbi. The numbers are off my rear differential:
GM1, H126, 14055251. These are the only numbers found on it! Thanks for the help.

The Squarebody Reference Library has some info there that might help you, but those #'s don't mean alot. The 14055251 is probably just a part #. I think the H126 is a date code, but that will not tell you anything as far as the carrier of gear ratio. This link should help locate the code you need, then look up the code and unless someone got in it making changes which is usually not the case, then you should know.
http://www.gmsquarebody.com/forum/showthread.php?t=4185
 

8T6K5

Full Access Member
Joined
Jun 22, 2012
Posts
1,128
Reaction score
121
Location
AZ
First Name
Jerry
Truck Year
1986
Truck Model
K5
Engine Size
L98 350 TPI
Just get a couple ziplock bags, in the quart size. Fill each bag with lube, then stuff them into the diff housing. Drive the truck. After a few feet, the lube is out of the bags... after a mile or so, the ziplock bags are now "posi additive". Seriously though, the mutilated bags won't hurt a thing.

Thats awesome. Someone should just make pre-filled bags packaged in small boxes. Keep all those plastic jugs out of the trash.....
 

87ChevyR10

Full Access Member
Joined
Sep 2, 2013
Posts
1,125
Reaction score
66
Location
Kansas
First Name
John
Truck Year
NA
Truck Model
NA
Engine Size
NA
Thats awesome. Someone should just make pre-filled bags packaged in small boxes. Keep all those plastic jugs out of the trash.....

What about 5th wheel grease pouches? Those are pre-filled pouches used to grease fifth wheels. They burst once a load is put on them.
 

radio2000

Full Access Member
Joined
Jul 28, 2017
Posts
186
Reaction score
103
Location
South Carolina
First Name
Chris
Truck Year
83 and 88
Truck Model
83 C10 and 88 R10 Burb
Engine Size
350
I'm planning on changing the rear diff oil in my 89 Burb this weekend. Was going to go with Royal Purple, but someone mentioned Amsoil Severe. Thoughts?

Thanks for all of the info here, need to check the RPO codes on mine, not sure if it's LS....

Sent from my SM-N986U1 using Tapatalk
 

Forum statistics

Threads
44,173
Posts
950,859
Members
36,288
Latest member
brentjo
Top