Search results

  1. J

    Oil dripping around starter

    Good point on the valve covers. I bought the correct valve covers for the year engine. They have 2 ports- actually three- one for PCV, one for breather and one for oil fill cap. There was a plug in the one for breather, I had to remove the plug and put in a grommet, then the breather. There...
  2. J

    Oil dripping around starter

    It would not surprise me if it was not done properly. The guy who runs the shop is really knowledgeable although I am not sure all of the techs are a high caliber. And that it took 2 months to do the work. I initially tried the shop out to fix my dual gas tanks issue. It would only pull from...
  3. J

    Help with Windshield Wiper Blades

    I ordered my wiper blade replacements from Classic Parts. They not only fit great but look original.
  4. J

    Fuel Line Repair at TBI

    Sure, next time I'm in the engine bay, I'll get a picture of my improvised fuel line.
  5. J

    Oil dripping around starter

    This is good idea, I'll take the cover off and have a look. When the rear main was done the first time, it definitely came directly from this area- this time, it's around the starter.
  6. J

    Oil dripping around starter

    This is interesting as the shop that did the rear main stated that they had to pull transfer case, tranny, etc. to do the rear main. It was leaking about the same as it is now but it needed a clutch so I had them do the rear main at the same time. It has a 74 block from a Chevelle or Monte...
  7. J

    Bought an '87 long bed on Bring a Trailer a few days ago

    Welcome, you did fine. I read BAT every single day and think I remember seeing this one. I check out every Squarebody looking at the picture to help restore my 87 V10 short box with the 4 speed. I paid top dollar for mine from a small dealer a year and a half ago. I paid way too much and I...
  8. J

    Oil dripping around starter

    I need some help diagnosing an oil leak in my 1987 Squarebody V10 with a 74 5.7 in it, SM 465 manual 4 speed. I have an oil leak, drips that originate around the starter dripping from both sides and flows down the protective plate at the bell housing and drips on the floor. I have looked all...
  9. J

    Front End Sheet Metal Assembly

    I just sanded, refinished, patched and re-painted my inner fender liners and entire front end. The fender liners came off easily, I did them separately. Then I just bolted them back on. I sanded, masked, primed and painted everything else once the front fascia was off, exposing everything nicely.
  10. J

    4x4 with 31x10.5/15 tire. Anyone running this size tire on stock lift??

    I have a stock 87 V10 4 X 4, stock height, original springs no lift. It has 32 X 11.50 mud tires on stock rally wheels on it and it looks great, perfect in my opinion. A little better than 31 X 10.50.
  11. J

    Looking at a 1984 and have questions

    Well the price goes up rapidly for a good one and you will most always find something wrong. I paid way, way too much for my 87 and already invested more than 15K. And if I include my own labor, it's way more than that. No matter what you get it's gonna cost- just depends how far you wanna go...
  12. J

    Fuel Line Repair at TBI

    Update on this for anyone that ever has the same issue. I was successfully able to install the Doorman partial fuel connector. It fit the TBI connection perfectly, I was able to use a tubing bender and place a 90 degree bend on the tubing , cut it and I put in a short section of fuel injector...
  13. J

    Spray vs Plastic Bedliner

    I much prefer bed liners but try and find one for an 87. No longer made. I have had many bed liners in my past trucks without any issues. Easy to clean and the bed underneath always looks new. There are some scratches from the liner running but no one ever sees it. Just be sure to take it...
  14. J

    Fuel Line Repair at TBI

    I did find that Doorman makes a high pressure Straight Union 3/8 to 3/8 steel connector- part number 800-205. It can be ordered through any auto parts store although it is not stocked. Any hardware store sells a brass unions but they are not for steel lines. I wonder if there is room to get...
  15. J

    Fuel Line Repair at TBI

    Ya I'm with you guys on replacing all of the lines. I just can't at the moment, tapped out for a few months. I am going to buy the new lines, have a shop do some major work for rear main leak (I think- and that another shop already did that I would not bring it back to) and at that time have...
  16. J

    Fuel Line Repair at TBI

    I have an 87 350 with the factory TBI set up. I replaced the valve covers this past weekend and was cleaning around the TBI and noticed that the fuel supply line at the TBI is extremely crimped- like it twisted when someone tightened the nut when they secured it to the TBI. The truck runs...
  17. J

    Question on battery/starter

    My truck had trouble starting after I got a brand new battery. Mainly after it warmed up. I had to replace the main cable (s) from the battery to the starter. I also had to route the cable down through the frame, it was poorly routed, connected to the top of the differential and moved up and...
  18. J

    Quality replacement steering box

    I had a shop do mine and they used a NAPA box (rebuilt). I was worried about issues but so far so good, no play or slop and no leaks.
  19. J

    Where to go for alignment?

    I had a shop do some work for me- new tie rod ends, new steering box and spring bushings all the way around. They were trying to get a software update for their alignment machine after the mechanical work was done. I end up waiting 2 weeks for that, letting the truck sit there. I finally got...
  20. J

    Are these dual shocks factory. Pic inside. 1987 K10 long bed truck

    I am also just curious where to buy such a long, custom shock bolt. I have checked a few common part suppliers on line out of curiosity and did not see anything listed. I did not look very hard though. I'd love to put dual shocks on if I could get some very soft or half valved ones as it...
  21. J

    Are these dual shocks factory. Pic inside. 1987 K10 long bed truck

    Mine has the dual shock per side option and I only have 1 per side installed. A lot of people ask me what the empty mounting brackets are for at car shows and I say it has the option for dual shocks per side. I was wondering about the shock valving and only have 1 per side installed, worried...
  22. J

    Muncie 4 Speed In A Truck?

    I have the SM 465 in mine. It's the 4 speed with the granny low but seems like a rugged trans, has a cast iron case. Great for crawling off road, too.
  23. J

    Clutch- Excessive Free Play When Cold

    Thanks I'll try both suggestions! I read about bleeding it backwards. I'll have to get one those oil cans. I had one years ago so I have used them in the past.
  24. J

    Clutch- Excessive Free Play When Cold

    I have an 87 Squarebody with SM 465 4 speed manual. I have done so much work on the truck the past year and it is coming along real nice. The clutch pedal has excessive free play (like 2") when it cools off or when cold. It will engage very close to the floor when this happens. After...
  25. J

    Alternator cable routing

    Mine had the red cable to the starter previously running down to a clip on the front differential, the by the exhaust manifold to the starter. Bad spot with the differential moving up and down and too close to the exhaust manifold. I had a shop do some work and they noticed the issue and gave...

Latest posts

Forum statistics

Threads
45,318
Posts
980,670
Members
38,348
Latest member
Elhuichol
Top