Search results

  1. gpmorgan

    350 to 454

    http://www.summitracing.com/parts/hly-12-803bp/overview/
  2. gpmorgan

    350 to 454

    Yes there ia a regulator/bypass valve that can be used. I have one on my engine. http://www.holley.com/VirtualShow/chevy/silverado/2607.asp I have also heard that to use the mechanical pump that all you have to do is disable the elec. pump and redo the supply lines which you will have to do...
  3. gpmorgan

    Water in my Diff..

    Clean it out good and put in new oil. If everything sounds good, run it a day or two and change it again.
  4. gpmorgan

    Powertrax Lock Rite locker?

    I've never used one but the reviews I read say they are a little noisy when turning and it's make your vehicle push when turning. I have an Eaton limited slip carrier that I have no complaints with. One thing I want to add is that the Powertrax is about 1/2 the price of the Eaton I have and...
  5. gpmorgan

    Transmission decisions

    If you decide on the 350 or 700 trans, you can get a cable operated floor shifter. I think B&M makes one for a truck.
  6. gpmorgan

    Setting Timing on a 87 C10 350 TBI

    I think there is a brown wire with black stripe behind the dizzy that needs to be unplugged. Warm engine up and set to zero. Turn engine off, plug wire back together. Take negative cable off of the battery for approx 30 sec to reset ecu.
  7. gpmorgan

    Rust on truck bed

    LMC trucks has bed sides that are pretty cheap if you can do body work. http://www.lmctruck.com/icatalog/cc/full.aspx?Page=28
  8. gpmorgan

    350 to 454

    Welcome to the forum Matt.
  9. gpmorgan

    350 to 454

    If the 454 is a stock engine, I would get an adapter plate and use the tbi from the 350. If it runs to lean you could always get a 454 tbi unit.
  10. gpmorgan

    New from Washington

    Welcome Anthony. You've found a great forum for information and help with your project. Post away.
  11. gpmorgan

    Question about tranny

    You may not be able to manually shift it in low(1st) or if you can the indicator may not read right. Not 100% sure.
  12. gpmorgan

    Can't get to HL dimmer switch. Ideas?

    You will have to remove the air duct. Don't forget to take the clip off that holds the indicator for the gear selector. Those are the only bolts that hold the column up.
  13. gpmorgan

    new guy

    Welcome Luis. Cool trucks.
  14. gpmorgan

    Transmission decisions

    Welcome Danny. I like the auto trans idea myself.
  15. gpmorgan

    Question about tranny

    Welcome to the forum Mike. Yes, they will all fit. I think starting in 93 and up they starting using the electronic versions and you would need a controller to use these. 92 and down uses the tv cable that hooks to your throttle and are cheaper to use.
  16. gpmorgan

    SOLD $500 6.2 Burb in Woodstock, VA Buy it, or it's being scrapped.

    Yeah, that would be a better idea. I used to have access to a GMC 6500 roll back that I used a few times.
  17. gpmorgan

    SOLD $500 6.2 Burb in Woodstock, VA Buy it, or it's being scrapped.

    Take a tranny and a driver with you and drive it back home. lol:rockit:
  18. gpmorgan

    New guy from the PNW.

    Welcome Josiah. That old 79 looked pretty good.
  19. gpmorgan

    electrical

    Do as 77k20 suggested. Here is a vid from youtube that explains it a little further. http://www.youtube.com/watch?v=KF1gijj03_0
  20. gpmorgan

    Steering column

    I think the van column will be to short. Also the mounting points are at a different angle. Not 100% sure.
  21. gpmorgan

    Brake caliper

    http://www.summitracing.com/parts/rsd-trd4705/applications/ Here's a kit from summit. Must have 16 in. or larger wheel.
  22. gpmorgan

    Nfg

    Welcome Tim.
  23. gpmorgan

    Brake caliper

    Do you have big wheels on the truck? Might check the rear brakes and make sure they are in good working order. Might even try a disc conversion on the rear. I didn't find many choises for front brake upgrades other than pads.
  24. gpmorgan

    o2 Sensor Location

    Not 100% sure on the 87. My 92 has it mounted in the left side exhaust manifold right before the exhaust pipe. The wire comes out of the engine harness about 10in from the sensor. It should be a purple wire. If your installing headers, you drill a hole in the collector and weld in a bung for...
  25. gpmorgan

    Jet stage 2 quadrajet

    http://www.summitracing.com/search/brand/jet-performance/product-line/jet-streetmaster-quadrajet-stage-2-carburetors?autoview=SKU Looks like summit has it about 100 bucks cheaper. This should be a direct replacement carb with no mods to your fuel lines etc. These quadrajet style carbs are hard...

Latest posts

Forum statistics

Threads
44,633
Posts
963,398
Members
37,207
Latest member
Chevy Man 1986
Top