Search results

  1. MikecLA

    Inner mirror bracket for driver's side doesn't seem to fit

    I got these brackets from LMC today and I’m trying to figure out how they mount your pictures are helping. I don’t have the hole on the inner door panel and I’m wondering if my mirrors are mounted in the right place as this truck used to have sport mirrors. Do the brackets sit in their vertical...
  2. MikecLA

    Oddball rally center

    I picked 4 15in rally wheels for my c10 but missing one factory? aluminum center cap BUT it’s bolts from behind wheel, any one have one? Or seen this? All the one I see plastic and aluminum bolt from front. Def hard to find! I’d prefer the original aluminum over buying 4 plastic. Thanks!
  3. MikecLA

    K20 uncommon HVAC Control unit

    I love that you want to keep original in that case maybe repair that one. Everything comes apart( with work) so get a similar unit and swap the arm over I say. If it was assembled it can be disassembled, maybe some rivets.
  4. MikecLA

    Anybody use classic industries

    Been there done that! I love classic ind. but like everyone else backorder delays. I got my serapa, Mexican blanket cover on Amazon. There are two on there, one sucks, thin and doesn’t wrap over the top with full material. 2nd one was great, thick like the ones in 70s, and wrapped over the top...
  5. MikecLA

    Under hood, what was here?

    Ah yes found the thread. Little more research I see it on 78-80 Blazers perhaps?. Extra safety measure as years went on, blazer specific being passenger vehicle? . My hood being aftermarket to fit many years includes it but thinking 73-75 the wiring harness would obstruct it. After that I see...
  6. MikecLA

    What goes here?

    Ah yes found the thread. Little more research I see it on 78-80 Blazers perhaps?. Extra safety measure as years went on, blazer specific being passenger vehicle? . My hood being aftermarket to fit many years includes it but thinking 73-75 the wiring harness would obstruct it. After that I see...
  7. MikecLA

    Under hood, what was here?

    Wow thanks. I know I’ve seen a center post on some years but goggle can’t find one picture! My firewall has no holes where this would’ve been. I think these hoods were 73 through 80, like I said I think this hood has been replaced I don’t think it fits my application.I have the two at the sides...
  8. MikecLA

    Under hood, what was here?

    Wasn’t sure where to post this one , I scored some windshield washer nozzles at the junkyard and putting them on my 74 c10 hood I see this giant hole, was this for a factory under hood light perhaps? Aftermarket hood most likely so maybe a universal hole? Thanks
  9. MikecLA

    Proper high beam switch mounting

    Thanks all! Contacted the distributor it’s on its way
  10. MikecLA

    Proper high beam switch mounting

    thanks, i some of the car forums mention that but nothing here.
  11. MikecLA

    Proper high beam switch mounting

    Just put in a full carpet in my 74 c10 and wondering how the floor mounted highbeam switch it’s is supposed to be mounted, under the carpet or over the carpet. The utilitarian in me says the truck just had the switch mounted on top of the carpet with the two screws going down through it...
    • MikecLA
    • Thread
    • 1974 c10 carpet high beam switch
    • Replies: 6
    • Forum: Interior
  12. MikecLA

    Coolant temp issues...

    I went thru all this on my 74. First off the factory gauge is not linear, meaning 1/4, 1/2, 3/4 mean nothing. 195 on mine is 1/4 up the gauge. I run a manual gauge as well to prove this. I have a new gauge ,proper sender and all. Even when i was a GM tech thru the 90s they purposely run gauges...
  13. MikecLA

    Title problems, vin swap?

    No one mentioned a putting a lien on it yet?! Here in CA I put a lien on a car. Used a local company. All they do is send the previous owner/registered to a letter, they have 30 days to respond ( in your case they won’t) and boom! It’s yours. You now take the paperwork to dmv/AAA and register...
  14. MikecLA

    74 window crank handles?!

    well a combination of cutting off the beveled end and dremmel tool on the handle to make the splines continue all the way down did the trick. Cant believe LMC didn't even have an answer for me. My guess is 73 regulators or earlier?... oh well. Good thing its not a blue ribbon restoration!
  15. MikecLA

    74 window crank handles?!

    that's got to be it,right? maybe the 73? Hope someone has an answer for me.
  16. MikecLA

    74 window crank handles?!

    OK I’ve been fighting everything on this truck right down to the window crank handles. Previous owner said they replaced the window regulators. The two crank handles aren’t deep enough for the clip to engage in the slot. I ordered two new ones from LMC same thing. I asked them to cross-reference...
  17. MikecLA

    Amps gauge resistor?

    After two parts stores failed attempt to get 4 amp fuses I get them online and they’re to short and smaller diameter for the oem holder.! How many sizes of glasses 4 amp fuses did they make? Just trying to keep the oem stuff going.
  18. MikecLA

    Amps gauge resistor?

    That would make sense, blank. Just reading the difference on both sides. Thanks for looking.
  19. MikecLA

    Amps gauge resistor?

    crickets....
  20. MikecLA

    Amps gauge resistor?

    Going through my gauges, my temp gauge has a resistor that you can clearly see the orange between the two posts. But my amp gauge has what looks like a blank ceramic resistor? Is it supposed to have a 90 on resistor here? - I’m replacing the two inline 4amp fuses as well. Thanks
  21. MikecLA

    Mystery valve... came out 78 400 th350

    i go with bucket. smog diverter valve. probably could ebay it. i was looking at a truck to buy but the guy pitched all the smog i would need for CA.
  22. MikecLA

    new to the C10 world

    Well i just picked up a74 C10 longbed and came here for all the great info. Il post some pictures soon thanks!

Latest posts

Forum statistics

Threads
44,416
Posts
957,123
Members
36,753
Latest member
TheRigLivesOn
Top